Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0233144 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not damage the millimeter wave radar sensor assembly.

·

If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.



PROCEDURE

Hide 88215 1.INSTALL NO.1 MILLIMETER WAVE RADAR SENSOR BRACKET

a.
B437838C02
1.969,0.615 2.167,0.844 0.198,0.229 10 true 1 2.365,1.323 2.521,1.521 0.156,0.198 10 true 2
V100135

Screw A
V100136

Screw B


Install the No. 1 millimeter wave radar sensor bracket with the 2 screws.

HINT:

Tighten the screws in the order shown in the illustration.