Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 1AD-FTV, 2AD-FHV, 2AD-FTV) › from 2015.10
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050042 CONDENSER(for 1AD-FTV, 2AD-FHV, 2AD-FTV) A

HEATING / AIR CONDITIONING  CONDENSER(for 1AD-FTV, 2AD-FHV, 2AD-FTV)  INSTALLATION  


PROCEDURE

Hide 88460 1.INSTALL COOLER CONDENSER ASSEMBLY

a.
E269749

Attach the 2 guides to install the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the cooler condenser or radiator when installing the cooler condenser assembly.


HINT:

If a new cooler condenser assembly is installed, add compressor oil to the condenser asfollows.


Capacity:

Add 40 cc (1.35 fl. oz.)


Compressor Oil:

ND-OIL 8 or equivalent



Hide 16533 2.INSTALL UPPER RADIATOR SUPPORT

a.

Install the 2 upper radiator supports with the 4 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 16533B 3.INSTALL NO. 1 RADIATOR SUPPORT

a.

Install the 2 No. 1 radiator supports with the 2 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 88706 4.CONNECT LIQUID PIPE SUB-ASSEMBLY

a.

Remove the vinyl tape from the liquid pipe sub-assembly and the connecting part of the cooler condenser with receiver assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the liquid pipe sub-assembly.


d.

Connect the liquid pipe sub-assembly to the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 88703 5.CONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.

Remove the vinyl tape from the discharge hose sub-assembly and the connecting part of the cooler condenser with receiver assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the discharge hose sub-assembly.


d.

Connect the discharge hose sub-assembly to the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 16681 6.INSTALL RADIATOR UPPER AIR GUIDE PLATE

Hide 52029 7.INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

Hide 9.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT