Home › General › SPECIFICATIONS › STOP AND START › from 2015.10
RM3090E _V1 General _009232 SPECIFICATIONS _0050463 STOP AND START F

SPECIFICATIONS  STOP AND START  SERVICE DATA  


for 2WW
Stop and start system cancel switch Standard resistance
2 (ECU) - 4 (E)
Below 1 Ω
(Pushed)
10 kΩ or higher
(Not pushed)
Battery positive (+) → 1 (ILL+)
Battery negative (-) → 5 (ILL-)
Illuminates

for 3ZR-FAE
Stop and start system cancel switch for Manual Transaxle Standard resistance
2 (ECU) - 4 (MSW2)
Below 1 Ω
(Pushed)
10 kΩ or higher
(Not pushed)
Battery positive (+) → 1 (MSW+)
Battery negative (-) → 5 (MSW-)
Illuminates
for CVT Standard resistance
5 (ECU) - 6 (MSW2)
Below 1 Ω
(Pushed)
10 kΩ or higher
(Not pushed)
Battery positive (+) → 2 (MSW+)
Battery negative (-) → 7 (MSW-)
Illuminates