Home › General › SPECIFICATIONS › 2WW EMISSION CONTROL › from 2015.10
RM3090E _V1 General _009232 SPECIFICATIONS _0208135 2WW EMISSION CONTROL F

SPECIFICATIONS  2WW EMISSION CONTROL  TORQUE SPECIFICATIONS  


EGR VALVE
Part Tightened N*m kgf*cm in.*lbf
EGR valve assembly x EGR cooler assembly 8.0 82 71

EGR COOLER
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
EGR cooler assembly with EGR valve assembly x Exhaust manifold, cylinder head sub-assembly and No. 2 EGR pipe sub-assembly for Bolt A 13 133 10
for Bolt B 19 194 14
for Bolt C 8.0 82 71
No. 1 exhaust manifold heat insulator x Exhaust manifold 8.0 82 71
Fuel feed pipe sub-assembly x Wire harness clamp bracket 8.0 82 71

EGR GAS TEMPERATURE SENSOR
Part Tightened N*m kgf*cm ft.*lbf
EGR gas temperature sensor x No. 2 EGR pipe without 14 mm union nut wrench 30 306 22
with 14 mm union nut wrench 28 286 21

EXHAUST GAS TEMPERATURE SENSOR (for Sensor 1)
Part Tightened N*m kgf*cm ft.*lbf
Exhaust gas temperature sensor (for Sensor 1) x Exhaust manifold converter sub-assembly without 14 mm union nut wrench 30 306 22
with 14 mm union nut wrench 28 286 21

EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)
Part Tightened N*m kgf*cm ft.*lbf
Exhaust gas temperature sensor (for Sensor 2) x Exhaust manifold converter sub-assembly without 14 mm union nut wrench 30 306 22
with 14 mm union nut wrench 28 286 21

DIFFERENTIAL PRESSURE SENSOR
Part Tightened N*m kgf*cm in.*lbf
Differential pressure sensor assembly x Cylinder head cover sub-assembly 4.0 41 35

MONOLITHIC CONVERTER
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Engine bracket x EGR cooler assembly 19 194 14
Exhaust manifold converter sub-assembly x Engine bracket, manifold stay and No. 2 manifold stay for Bolt 38 387 28
for Nut 19 194 14
for V-band clamp 15 153 11
No. 1 exhaust manifold heat insulator x Exhaust manifold and turbo oil outlet pipe 8.0 82 71
Outer cowl top panel x Body 7.0 71 62
No. 3 cowl top panel insulator x Outer cowl top panel 5.5 56 49