Home › Engine / Hybrid System › 2AD-FTV COOLING › COOLING FAN MOTOR › from 2015.10
RM3090E _51 Engine / Hybrid System _008373 2AD-FTV COOLING _0046726 COOLING FAN MOTOR A

2AD-FTV COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR (w/o Towing Package)

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Attach the 3 harness clamps to the fan shroud.


Hide 16363A 2.INSTALL NO. 2 COOLING FAN MOTOR (w/ Towing Package)

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 3.INSTALL COOLING FAN MOTOR (w/o Towing Package)

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 4.INSTALL COOLING FAN MOTOR (w/ Towing Package)

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 5.INSTALL COOLING FAN ECU (w/ Towing Package)

a.

Install the 2 cooling fan ECU with the 4 screws.

Torque:
2.6 N*m (27 kgf*cm, 23 in.*lbf)


b.

Attach the 3 clamps and connect the No. 2 cooling fan motor connector.


c.

Attach the 3 clamps and connect the cooling fan motor connector.


Hide 16361 6.INSTALL FAN AND NO. 2 FAN (w/o Towing Package)

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.

Install the fan and No. 2 fan with the 2 nuts.

Torque:
6.3 N*m (64 kgf*cm, 55 in.*lbf)


Hide 16361 7.INSTALL FAN AND NO. 2 FAN (w/ Towing Package)

NOTICE:

Do not switch the fan and No. 2 fan when installing them. Parts may be damaged if the cooling fans are installed in the wrong locations.


a.

Install the fan and No. 2 fan with the 2 nuts.

Torque:
6.3 N*m (64 kgf*cm, 55 in.*lbf)


Hide 8.CHECK COOLING FAN MOTOR OPERATION

Hide 16400 9.INSTALL RADIATOR ASSEMBLY