84970
1.INSPECT COMBINATION SWITCH ASSEMBLY (ECO SWITCH)
| *a | Component without harness connected
(Combination Switch Assembly (Eco Switch)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3(ECU) - 5(MSW2) | ECO switch turned and held at ECO position | Below 10 Ω |
| ECO switch not turned | 1 MΩ or higher |
If the result is not as specified, replace the combination switch assembly (eco switch).