Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMBUSTION TYPE POWER HEATER SYSTEM › from 2015.10
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0049438 COMBUSTION TYPE POWER HEATER SYSTEM U

HEATING / AIR CONDITIONING  COMBUSTION TYPE POWER HEATER SYSTEM  TERMINALS OF ECU  


INSPECT HEATER ASSEMBLY


E124453N02
3.396,0.156 3.75,0.427 0.354,0.271 3.469,0.198 3.75,0.354 0.281,0.156 10 A33

a.

Measure the voltage, resistance and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: for 2WW

*2: except 2WW

A33-1 (E) - Body ground W-B - Body ground Ground for main power supply Always Below 1 Ω
A33-2 (L) - Body ground G - Body ground Fuel pump operation signal Engine running
Heater switch assembly on
Pulse generation
(See waveform 1)
A33-3 (IG) - Body ground LG - Body ground Power heater operating signal Ignition switch ON
Heater switch assembly on
11 to 14 V
A33-3 (IG) - Body ground LG - Body ground Power heater operating signal Ignition switch off
Heater switch assembly off
Below 1 V
A33-5 (B) - Body ground R - Body ground Power source Always 11 to 14 V
A33-8 (+) - Body ground L - Body ground*1
V - Body ground*2
Engine operating signal Engine running
(Generator assembly operating)
11 to 14 V


b.
E130372E04
0.104,1.688 0.573,1.99 0.469,0.302 10 GND

Waveform 1:

Heater Fuel Pump Control Signal
Item Content
Terminal No. (Symbol) A33-2 (L) - Body ground
Tool Setting 2 V/DIV., 20 ms/DIV.
Vehicle Condition Engine running
Heater switch assembly on