Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG › from 2015.10
RM3090E _51 Engine / Hybrid System _008380 3ZR-FE ENGINE CONTROL _0046996 IGNITION COIL AND SPARK PLUG A

3ZR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the ignition coil assembly or the spark plug.



PROCEDURE

Hide 19100P 1.INSTALL SPARK PLUG

a.

Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

HINT:

Perform "Inspection After Repairs" after replacing the spark plug.




Hide 19500 2.INSTALL IGNITION COIL ASSEMBLY

a.
A205086C03
1.813,2.469 1.625,2.469 1.625,2.469 1.365,2.74 false 0.979,3.427 1.833,3.427 false 0.865,3.875 1.802,3.875 true 1.865,2.385 2.052,2.563 0.188,0.177 10 *1 1.875,3.344 2.052,3.521 0.177,0.177 10 *2 1.844,3.802 2.031,3.979 0.188,0.177 10 *3
*1 Cylinder Head Cover
*2 Spark Plug Tube
*3 Plug Cap


Install the 4 ignition coil assemblies with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

When installing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.


HINT:

Perform "Inspection After Repairs" after replacing the ignition coil assembly.




b.

Connect the 4 ignition coil assembly connectors.


Hide 11212 3.INSTALL NO. 2 CYLINDER HEAD COVER