Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.
for K111, K111F:
Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM(for K111, K111F)>INITIALIZATION
except K111, K111F:
Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM(except K111, K111F)>INITIALIZATION
89422
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
Install a new gasket to the engine coolant temperature sensor.
Using SST, install the engine coolant temperature sensor.
Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.
for K111, K111F:
Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM(for K111, K111F)>INITIALIZATION
except K111, K111F:
Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM(except K111, K111F)>INITIALIZATION
Connect the engine coolant temperature sensor connector.
2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17705
3.INSTALL AIR CLEANER CAP SUB-ASSEMBLY
11212
4.INSTALL NO. 2 CYLINDER HEAD COVER
5.ADD ENGINE COOLANT
6.INSPECT FOR COOLANT LEAK
51441
7.INSTALL NO. 1 ENGINE UNDER COVER