This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the audio and visual system vehicle customization screen.
The certification ECU (smart key ECU assembly) controls the entry and start system (for Entry Function) related items that are customizable via the display screen.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15F7 | Certification ECU Vehicle Information Reading/Writing Process Malfunction | Certification ECU (smart key ECU assembly) vehicle setting processing error. | ·
CAN communication system ·
Entry and start system (for Entry Function) ·
Certification ECU (smart key ECU assembly) ·
Radio and display receiver assembly |
Check if the CAN communication system is functioning normally.
for LHD with Central Gateway ECU:
for LHD without Central Gateway ECU:
for RHD with Central Gateway ECU:
for RHD without Central Gateway ECU:
| Proceed to |
|---|
| No DTCs are output |
| CAN DTCs are output |
No DTCs are output
CAN DTCs are output
for LHD with Central Gateway ECU:
for LHD without Central Gateway ECU:
for RHD with Central Gateway ECU:
for RHD without Central Gateway ECU:
Check if the entry and start system (for Entry Function) is malfunctioning.
Customization may not be possible depending on the malfunction in the entry and start system (for Entry Function).
No malfunctions are present in the entry and start system (for Entry Function).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Display the "Vehicle settings" screen.
Make a note of the customizable items for each certification ECU related system.
These items shown as customizable via the audio and visual system vehicle customization screen can also be changed manually. In a following step, a manual procedure will be used.
Check the customize parameters list for the entry and start system (for Entry Function) related items that can be customized via the display screen.
Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the display screen.
The items available for customization via the display screen can be customized successfully using the manual procedure.
| Proceed to |
|---|
| OK |
| NG |
OK
NG