Home › Power Source / Network › 2AD-FHV BATTERY / CHARGING › CHARGING SYSTEM › from 2015.10
RM3090E _57 Power Source / Network _008778 2AD-FHV BATTERY / CHARGING _0049277 CHARGING SYSTEM Y

2AD-FHV BATTERY / CHARGING  CHARGING SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

*: Use the GTS.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.



·

The following 5 items are important points in the problem analysis:


What Vehicle model, system name
When Date, time, occurrence frequency
Where Road conditions
Under what conditions? Running conditions, driving conditions, weather conditions
How did it happen? Problem symptoms

Result:
Proceed to
NEXT



NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result:
Proceed to
NEXT



NEXT

4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

No Malfunction appears

5.CHECK FOR DTC*

Malfunction appears

5.CHECK FOR DTC*
HINT:

Refer to DTC Check / Clear.

Click herePower Source / Network>2AD-FHV BATTERY / CHARGING>CHARGING SYSTEM>DTC CHECK / CLEAR


Result:
Proceed to
DTCs are not output
DTCs are output



DTCs are not output

6.REFER TO PROBLEM SYMPTOMS TABLE

DTCs are output

6.REFER TO PROBLEM SYMPTOMS TABLE
HINT:

Refer to Problem Symptoms Table.

Click herePower Source / Network>2AD-FHV BATTERY / CHARGING>CHARGING SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Proceed to
Malfunctioning parts are not confirmed
Malfunctioning parts are confirmed



Malfunctioning parts are not confirmed

7.OVERALL ANALYSIS AND TROUBLESHOOTING*

Malfunctioning parts are confirmed

12.ADJUST AND/OR REPAIR
7.OVERALL ANALYSIS AND TROUBLESHOOTING*
HINT:

Refer to Data List / Active Test.

Click herePower Source / Network>2AD-FHV BATTERY / CHARGING>CHARGING SYSTEM>DATA LIST / ACTIVE TEST


Result:
Proceed to
Malfunctioning parts are not confirmed
Malfunctioning parts are confirmed



Malfunctioning parts are not confirmed

8.CHECK ECU CIRCUIT

Malfunctioning parts are confirmed

12.ADJUST AND/OR REPAIR
8.CHECK ECU CIRCUIT
HINT:

Refer to Terminals of ECM.

Click herePower Source / Network>2AD-FHV BATTERY / CHARGING>CHARGING SYSTEM>TERMINALS OF ECM


Result:
Result
OK
NG



OK

9.CHECK FOR INTERMITTENT PROBLEMS

NG

12.ADJUST AND/OR REPAIR
9.CHECK FOR INTERMITTENT PROBLEMS
HINT:

Refer to Symptom Simulation.

Click hereEngine / Hybrid System>2AD-FHV ENGINE CONTROL>ECD SYSTEM>CHECK FOR INTERMITTENT PROBLEMS


Result:
Proceed to
NEXT



NEXT

10.CONDUCT PARTS INSPECTION
10.CONDUCT PARTS INSPECTION
Result:
Proceed to
NEXT



NEXT

11.IDENTIFY PROBLEM
11.IDENTIFY PROBLEM
Result:
Proceed to
NEXT



NEXT

12.ADJUST AND/OR REPAIR
12.ADJUST AND/OR REPAIR
Result:
Proceed to
NEXT



NEXT

13.CONDUCT CONFIRMATION TEST
13.CONDUCT CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END