Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2016.08
RM3090E _58 Vehicle Interior _008429 LIGHTING (INT) _0047052 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  SYSTEM DESCRIPTION  


ILLUMINATION CONTROL SYSTEM (Illuminated Entry System)


HINT:

When inspecting the following functions, make sure that the map light switch and No. 1 room light switch are DOOR position.


a.

The illuminated entry system has the following control functions:

Control Outline Lighting

*1: w/ Entry and Start System

*2: w/o Entry and Start System

*3: w/ Footwell Light

Actuation Area-linked*1 When a registered key is brought within any vehicle exterior detection area around the doors, the items listed to the right turn on.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination


Door Lock/Unlock-linked When any door is unlocked, the items listed to the right turn on.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination*1

·

Ignition key cylinder light*2

·

Footwell light*3


When all doors are locked, the items listed to the right turn off.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination*1

·

Ignition key cylinder light*2


Door Open/Close-linked When any door is opened, the items listed to the right turn on.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination*1

·

Ignition key cylinder light*2

·

Footwell light*3


When all doors are closed, the items listed to the right turn off.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination*1

·

Ignition key cylinder light*2


Engine Switch-linked*1
Ignition Switch-linked*2
When the ignition switch is turned from ACC or ON to off, the items listed to the right turn on.
·

Map light assembly

·

No. 1 room light assembly

·

Engine switch illumination*1

·

Ignition key cylinder light*2

·

Footwell light*3





BATTERY SAVING CONTROL SYSTEM


a.

The battery saving control system has the following control functions:

Control Outline Lighting

*1: w/ Entry and Start System

*2: w/o Entry and Start System

Basic function
·

When the doors remain in the same condition for 20 minutes and the key is outside the vehicle exterior detection area, the illumination of the items listed to the right turns off.*1


·

When the doors remain in the same condition for 20 minutes and the key is not in the ignition key cylinder, the illumination of the items listed to the right turns off.*2


·

Engine switch illumination*1

·

Ignition key cylinder light*2


Interior light auto cut function The illumination of the items listed on the right will turn off 20 minutes after the ignition switch is turned off, regardless of whether the doors are open or closed and regardless of the map light switch position.
·

Map light assembly

·

No. 1 room light assembly

·

No. 2 room light assembly

·

Vanity light assembly