Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 2WW) › from 2016.08
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0208272 CONDENSER(for 2WW) A

HEATING / AIR CONDITIONING  CONDENSER(for 2WW)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 52029 3.REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

Hide 16681A 4.REMOVE RADIATOR UPPER AIR GUIDE PLATE

Hide 88703 5.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.
E334751

Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.


b.

Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88706 6.DISCONNECT LIQUID PIPE SUB-ASSEMBLY

a.
E334752

Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.


b.

Remove the O-ring from the liquid pipe sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 16533B 7.REMOVE NO. 1 RADIATOR SUPPORT

E334753

a.

Remove the 2 bolts and 2 No. 1 radiator supports.


Hide 16533 8.REMOVE UPPER RADIATOR SUPPORT

E334754

a.

Remove the 4 bolts and 2 upper radiator supports.


Hide 88460 9.REMOVE COOLER CONDENSER ASSEMBLY

a.
E334755

Detach the 2 guides and remove the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the condenser or radiator when removing the cooler condenser assembly.