Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX › from 2016.08
RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049316 FRONT CONSOLE BOX A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 58905 1.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (except Slide Console Type)

a.
B457546

If a C-ring is attached, removal the C-ring.

HINT:

When installing, reinstallation is not required.



b.
B457548C01
2.042,2.208 2.531,2.208 true 2.229,0.313 2.531,0.313 2.531,0.313 2.885,0.99 true 2.042,0.229 2.354,0.427 0.313,0.198 10 false *1 2.573,2.125 2.885,2.323 0.313,0.198 10 false *a
*1 Shaft
*a Plastic-faced Hammer


Using a plastic-faced hammer, tap the shaft in lightly and then pull it out from the rear console box sub-assembly.


c.
B457549

Remove the 2 bushes and console compartment door sub-assembly.


Hide 58905 2.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Slide Console Type)

a.
B337867

Remove the 4 screws and console compartment door sub-assembly.


Hide 58908A 3.REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

a.
B337863

Remove the 2 screws and console compartment door lock sub-assembly from the console compartment door sub-assembly.


Hide 58808 4.REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)

a.
B438317

Detach the 4 hooks and remove the shifting hole cover sub-assembly from the upper console panel sub-assembly.