Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY LH
71868A
2.REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
71812D
3.REMOVE FRONT SEAT CUSHION SHIELD LH
84921B
4.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
84921A
5.REMOVE RECLINING POWER SEAT SWITCH KNOB
84070
6.REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY
Remove the 3 screws and position control ECU and switch assembly.