Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE › from 2016.08
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0049867 REFRIGERANT LINE A

HEATING / AIR CONDITIONING  REFRIGERANT LINE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL PIPING CLAMP

a.

Remove the vinyl tape from the air conditioner tube and accessory assembly and cooler refrigerant liquid pipe C.


b.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the cooler refrigerant liquid pipe C.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the 2 O-rings to the cooler refrigerant liquid pipe C.


d.

Install the air conditioner tube and accessory assembly to the cooler refrigerant liquid pipe C.


e.
E273286C02
0.667,0.333 0.979,0.531 0.313,0.198 10 false *a 2.354,0.333 2.667,0.531 0.313,0.198 10 false *b 0.083,0.583 0.396,0.781 0.313,0.198 10 false *c 1.792,0.531 2.104,0.729 0.313,0.198 10 false *d
*a Correct
*b Incorrect
*c No Gap
*d Gap


Install the piping clamp to the air conditioner tube and accessory assembly.

NOTICE:

Make sure that the piping clamp is engaged securely with no gap.



Hide 2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT