Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) › from 2016.08
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0066374 SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) W

SEAT BELT  SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH GTS (REFERENCE)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Utility / Customize Setting / Warning.


e.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Driver Side Seatbelt Warning Buzzer Enables sounding of the driver seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Enables sounding of the front passenger seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
Rear Seatbelt Warning Buzzer Enables sounding of the rear seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
50006 7