Home › General › INTRODUCTION › WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS › 2018.10–2020.08
BM3620E _V1 General _078136 INTRODUCTION _0379061 WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS F

INTRODUCTION  WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS  REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY  


HINT:
·

If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

·

Make sure that the headlight assembly is not damaged.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Triple Beam Headlight)


a.
E407909C01
0.594,3.833 0.865,3.354 true 2.625,4.115 2.833,3.594 true 0.5,3.854 0.677,4.031 0.177,0.177 10 true *a 2.542,4.156 2.719,4.333 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407910

Install the upper headlight protector retainer LH with the 2 screws.



INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Triple Beam Headlight)


a.
E407905C01
1.24,3.948 1.844,3.948 true 2.302,4.26 2.448,3.781 true 1.031,3.833 1.208,4.01 0.177,0.177 10 false *a 2.198,4.292 2.375,4.469 0.177,0.177 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407906

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for Triple Beam Headlight)


a.
E407907C01
0.938,3.76 1.906,4.25 true 1.552,3.427 2.333,3.708 true 1.948,4.208 2.156,4.375 0.208,0.167 10 false *a 2.375,3.646 2.583,3.813 0.208,0.167 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407908

Install the lower headlight protector retainer LH with the 2 screws.



INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Triple Beam Headlight)


a.
E407903C01
2.406,3.375 1.833,3.375 true 1.896,4.083 1.323,4.083 true 2.469,3.281 2.781,3.438 0.313,0.156 10 false *a 1.958,3.979 2.271,4.135 0.313,0.156 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407904

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Single Beam Headlight)


a.
E407917C01
0.604,3.833 0.875,3.354 true 3.063,4.094 2.917,3.615 true 0.5,3.854 0.677,4.031 0.177,0.177 10 true *a 3.01,4.115 3.188,4.292 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407918

Install the upper headlight protector retainer LH with the 2 screws.



INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Single Beam Headlight)


a.
E407913C01
1.219,3.906 1.823,3.906 true 2.26,4.25 2.406,3.771 true 1.021,3.802 1.198,3.979 0.177,0.177 10 false *a 2.167,4.281 2.344,4.458 0.177,0.177 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407914

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for Single Beam Headlight)


a.
E407915C01
0.781,3.833 1.75,4.323 true 1.406,3.479 2.188,3.76 true 1.823,4.281 2.031,4.448 0.208,0.167 10 false *a 2.229,3.698 2.438,3.865 0.208,0.167 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407916

Install the lower headlight protector retainer LH with the 2 screws.



INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Single Beam Headlight)


a.
E407911C01
2.479,3.25 1.906,3.25 true 2,3.906 1.427,3.906 true 2.531,3.156 2.844,3.313 0.313,0.156 10 false *a 2.052,3.802 2.365,3.958 0.313,0.156 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E407912

Install the upper No. 2 headlight protector retainer LH with the 2 screws.