With the radiator upper side support assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Cut and Join Location |
| *a | 180 mm (7.09 in.) | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Butt Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | FENDER SIDE APRON SUB-ASSEMBLY | *2 | FRONT APRON TO COWL SIDE MEMBER OUTER FRONT |
| *3 | FRONT FENDER APRON GUSSET UPPER | - | - |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.