Home › Vehicle Exterior › BODY PANEL › ROCKER OUTER PANEL
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0383645 ROCKER OUTER PANEL F

BODY PANEL  ROCKER OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K149463

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

K148846C01
3.583,3.01 3.896,3.167 0.313,0.156 10 false *a
*a 340 mm (13.39 in.) - -


K148848

a.

When replace only the outer panel, please cut off a necessary range depending on a damage range.

i.

Carefully cut the outer panel so not to damage the reinforcement.


ii.

Make sure that butt welding does not heat-affect the reinforcement when welding the outer panel.




INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K148847C01
3.229,3.969 3.333,4.667 3.333,4.667 3.5,4.667 false 3.552,4.573 3.865,4.729 0.313,0.156 10 false *1
*1 CENTER BODY PILLAR OUTER - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.