Home › Vehicle Exterior › BODY PANEL › ROCKER REAR PANEL
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0383647 ROCKER REAR PANEL F

BODY PANEL  ROCKER REAR PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K149469

quarter panel cut and join replacement sections (small areas) removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K149068C01
1.51,1.146 1.823,1.302 0.313,0.156 10 false *a
*a 280 mm (11.02 in.) - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

After welding the quarter reinforcement inner to the vehicle side, install the quarter panel reinforcement outer.

K149069C01
1.01,3.667 1.177,3.667 1.177,3.667 1.583,4.177 false 3.625,1.906 4.417,1.583 4.417,1.583 4.583,1.583 false 0.813,3.583 1.125,3.74 0.313,0.156 10 false *2 4.604,1.5 4.917,1.656 0.313,0.156 10 false *1
*1 QUARTER REINFORCEMENT INNER *2 QUARTER PANEL REINFORCEMENT OUTER



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.