Home › Vehicle Exterior › BODY PANEL › QUARTER WHEEL HOUSING OUTER PANEL › 2018.10–2019.09
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0383649 QUARTER WHEEL HOUSING OUTER PANEL F

BODY PANEL  QUARTER WHEEL HOUSING OUTER PANEL  ASSEMBLY REPLACEMENT  


K149470

With the rocker rear panel cut and join replacement sections removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Remove the roof side panel outer.

K150308C01
5.25,2.833 5.083,2.833 5.083,2.833 3.417,2.167 false 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A 5.292,2.76 5.604,2.917 0.313,0.156 10 false *1 2.281,1.323 2.594,1.479 0.313,0.156 10 false *a
*A LH - -
*1 ROOF SIDE PANEL OUTER - -
*a 90 mm (3.54 in.) - -



b.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K150309C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



c.

Remove the quarter wheel house panel outer.

K150310C01
3.5,4.167 3.333,4.167 3.333,4.167 3.865,2.813 false 0.188,0.177 0.5,0.333 0.313,0.156 10 false *A 3.583,4.094 3.896,4.25 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K149073C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A LH - -


K149076C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A LH - -



d.

Remove the roof side panel outer.

K149077C01
4.208,2.5 5.417,3.083 5.417,3.083 5.583,3.083 false 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A 5.604,3.01 5.917,3.167 0.313,0.156 10 false *1 4.781,1.333 5.094,1.49 0.313,0.156 10 false *a
*A RH - -
*1 ROOF SIDE PANEL OUTER - -
*a 90 mm (3.54 in.) - -



e.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K149078C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -



f.

Remove the quarter wheel house panel outer.

K149079C01
4,4.5 4.167,4.5 4.167,4.5 4.406,3.25 false 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A 3.792,4.417 4.104,4.573 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K149080C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -


K149083C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A RH - -




INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108830

Fillet Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K150311C01
3,2.583 2.833,2.583 2.833,2.583 2.479,1.375 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 3.073,2.51 3.385,2.667 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



b.
HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K150309C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



c.

Weld the rear wheel house panel outer to the vehicle side.

HINT:

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.


K150312C01
3.75,4.333 3.583,4.333 3.583,4.333 3.958,2.823 false 0.188,0.167 0.5,0.323 0.313,0.156 10 false *A 3.813,4.26 4.125,4.417 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K149085C02
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A LH - -


K149088C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 4.49,1.167 4.802,1.323 0.313,0.156 10 false *a
*A LH - -
*a 10 mm (0.39 in.) - -



d.

Weld the roof side panel outer to the vehicle side.

K150313C01
5.167,3 5,3 5,3 3.417,2.25 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 5.188,2.927 5.5,3.083 0.313,0.156 10 false *1
*A LH - -
*1 ROOF SIDE PANEL OUTER



e.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K149078C02
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



f.

Weld the rear wheel house panel outer to the vehicle side.

HINT:

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.


K149090C01
1.5,2.583 1.667,2.583 1.667,2.583 2.354,2.833 false 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A 1.333,2.51 1.646,2.667 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K149091C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -


K149094C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A 2.542,1.167 2.854,1.323 0.313,0.156 10 false *a
*A RH - -
*a 10 mm (0.39 in.) - -



g.

Weld the roof side panel outer to the vehicle side.

K149089C01
4.208,2.5 5.25,2.917 5.25,2.917 5.417,2.917 false 0.188,0.167 0.5,0.323 0.313,0.156 10 false *A 5.438,2.844 5.75,3 0.313,0.156 10 false *1
*A RH - -
*1 ROOF SIDE PANEL OUTER



h.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


i.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.