Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0383650 BACK DOOR OPENING TROUGH F

BODY PANEL  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K149471

With the quarter panel cut and join replacement sections (large areas) and body lower back panel removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points

K149766C01
1.385,0.979 1.698,1.135 0.313,0.156 10 false *a
*a 150 mm (5.91 in.) - -



INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K149767C01
1.083,1.333 1.25,1.333 1.25,1.333 1.563,1.677 false 4.167,2 4.333,2 4.333,2 5.167,2.417 false 6.5,3.583 6.333,3.583 6.333,3.583 5.667,2.917 false 0.927,1.26 1.24,1.417 0.313,0.156 10 false *1 4,1.927 4.313,2.083 0.313,0.156 10 false *2 6.51,3.51 6.823,3.667 0.313,0.156 10 false *3
*1 BACK DOOR OPENING TROUGH *2 QUARTER PANEL EXTENSION UPPER REAR
*3 SIDE PANEL REAR END PATCH - -



c.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.