Home › Vehicle Exterior › BODY PANEL › REAR FLOOR SIDE MEMBER
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0383659 REAR FLOOR SIDE MEMBER F

BODY PANEL  REAR FLOOR SIDE MEMBER  ASSEMBLY REPLACEMENT  


K149479

With the body lower back panel assembly and rear floor lower rear crossmember assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points

K149135


K149136C01
0.25,0.5 3.583,3.583 3.333,3.083 3.583,0.5 6.927,3.583 3.344,3.083 0.417,0.667 0.729,0.823 0.313,0.156 10 false *A 3.75,0.677 4.063,0.833 0.313,0.156 10 false *B
*A LH *B RH


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108835

Assembly Mark

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

For positioning of the new parts, align the installation standard holes of the rear floor side member sub-assembly rear and the member.

K149137C01
2.479,2.094 3.25,1.583 3.25,1.583 3.417,1.583 false 3.438,1.51 3.75,1.667 0.313,0.156 10 false *1
*1 REAR FLOOR SIDE MEMBER SUB-ASSEMBLY REAR - -


K149138C01
3.583,0.333 6.917,3.5 3.333,3.167 0.25,0.333 3.583,3.5 3.333,3.167 0.417,0.51 0.729,0.667 0.313,0.156 10 false *A 3.75,0.5 4.063,0.656 0.313,0.156 10 false *B
*A LH *B RH



c.

After welding, apply undercoating to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.