REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Spot Weld |
|
Plug Weld |
|
Plug Weld |
|
Body Sealer |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement no.2.
Apply enough body sealer to the panels.
| *1 | ROOF PANEL REINFORCEMENT NO.2 | - | - |
Before temporarily installing the new parts, weld the roof panel no.3 and roof panel reinforcement no.2 with the standard number of welding points.
| *1 | ROOF PANEL NO.3 | *2 | ROOF PANEL REINFORCEMENT NO.2 |
Before temporarily installing the new parts, apply body sealer to the back door opening frame sub-assembly.
Apply enough body sealer to the panels.
| *1 | BACK DOOR OPENING FRAME SUB-ASSEMBLY | - | - |
After welding, apply body sealer to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 726 mm (28.58 in.) | B | 897 mm (35.31 in.) |
| C | 881 mm (34.68 in.) | - | - |