With the rocker rear panel cut and join replacement sections removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
|
Cut and Join Location |
Remove the roof side panel outer.
| *A | LH | - | - |
| *1 | ROOF SIDE PANEL OUTER | - | - |
| *a | 90 mm (3.54 in.) | - | - |
Remove the quarter wheel house panel outer.
| *A | LH | - | - |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | LH | - | - |
| *A | LH | - | - |
Remove the roof side panel outer.
| *A | RH | - | - |
| *1 | ROOF SIDE PANEL OUTER | - | - |
| *a | 90 mm (3.54 in.) | - | - |
Remove the quarter wheel house panel outer.
| *A | RH | - | - |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | RH | - | - |
| *A | RH | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Spot Weld |
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
|
Fillet Weld |
|
Butt Weld |
|
Assembly Mark |
If the entire supply part is not needed, remove the part of the supply part that is needed.
| *A | LH | - | - |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | LH | - | - |
Weld the rear wheel house panel outer to the vehicle side.
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | LH | - | - |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | LH | - | - |
| *A | LH | - | - |
| *a | 10 mm (0.39 in.) | - | - |
Weld the roof side panel outer to the vehicle side.
| *A | LH | - | - |
| *1 | ROOF SIDE PANEL OUTER |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | RH | - | - |
Weld the rear wheel house panel outer to the vehicle side.
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | RH | - | - |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | RH | - | - |
| *A | RH | - | - |
| *a | 10 mm (0.39 in.) | - | - |
Weld the roof side panel outer to the vehicle side.
| *A | RH | - | - |
| *1 | ROOF SIDE PANEL OUTER |
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.