Home › Vehicle Exterior › BODY PANEL › BODY LOWER BACK PANEL (for TMR Made) › from 2019.09
BM3620E _01 Vehicle Exterior _077725 BODY PANEL _0408199 BODY LOWER BACK PANEL(for TMR Made) F

BODY PANEL  BODY LOWER BACK PANEL(for TMR Made)  ASSEMBLY REPLACEMENT  


K149468

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points

K149104

K149105C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A LH Side - -


K149106C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH Side - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K149107C01
3.25,2.167 3.833,1.583 3.833,1.583 4,1.583 false 4.021,1.5 4.333,1.656 0.313,0.156 10 false *1
*1 BODY LOWER BACK PANEL SUB-ASSEMBLY - -


K149108C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A LH Side - -


K149109C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH Side - -



c.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.