Home › General › INTRODUCTION › WORK NOTICES AND PRECAUTIONS › from 2020.01
BM3620E _V1 General _078136 INTRODUCTION _0379060 WORK NOTICES AND PRECAUTIONS F

INTRODUCTION  WORK NOTICES AND PRECAUTIONS  PRECAUTIONS FOR SRS AIRBAG SYSTEM  


PRECAUTIONS WHEN REPAIRING BODY


a.

Refer to the TOYOTA Repair Manual for the SRS airbag system precaution and inspection procedures.

HINT:

Vehicle Interior > SUPPLEMENTAL RESTRAINT SYSTEMS



b.

Apply masking tape to the door side airbag sensor to prevent the entry of foreign matter.

NOTICE:
·

Use large, clearly visible pieces of masking tape to prevent tape from being left on the sensor after the procedure.



PRECAUTION INSPECTION/PROCEDURE
Prevention of foreign matter entry into sensor Painting and grinding with service hole cover removed
·

Before performing work, apply masking tape to the airinlet (A) of the door side airbag sensor to prevent the entry of foreign matter. (such as paint. dust and pieces of glass)

·

Keep the spray of vacuum cleaner nozzle away from the sensor. Otherwise, it may be damaged.


Applying anti-rust agents (wax)
Removing pieces of glass from inside door panel



K140674C03
2.177,0.438 2.417,0.167 2.417,0.167 2.583,0.167 false 0.167,0.094 0.479,0.25 0.313,0.156 10 false A 2.458,1.938 2.771,2.094 0.313,0.156 10 false *2 2.688,0.094 3,0.25 0.313,0.156 10 false *1
*1 Door side airbag sensor
*2 Air inlet