FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: HV models *2: Gasoline models |
||
| Headlight Assembly LH | Headlight ECU Sub-assembly RH | Receives daytime running light control signals and illuminates the daytime running lights. |
| Headlight Assembly RH | Headlight ECU Sub-assembly LH | |
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and transmits the daytime running light control signal. | |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Automatic Light Control Sensor | Detects the ambient light level and transmits a signal to the main body ECU. | |
| Hybrid Vehicle Control ECU*1 | Sends the READY signal to the main body ECU. | |
| ECM | Sends the engine speed signal to the main body ECU.*2 | |
| Parking Brake ECU Assembly*1 | Sends the parking brake operation signal to the main body ECU. | |
| Skid Control ECU | Sends the parking brake operation signal to the main body ECU.*2 | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
SYSTEM CONTROL
Operating Condition
The daytime running lights illuminate when the following conditions are all met.
The power switch is on (IG).*1
The ignition switch is ON.*2
The READY signal is input.*1
The engine speed signal is input (engine is running).*2
The light control switch is in the ○ (off)*3 or AUTO position (and the taillights are not turned on via the automatic light control system).
The parking brake is released.
*1: HV models
*2: Gasoline models
*3: Models with light control switch (off position)
FUNCTION
The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.