Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
NM3620E _59 Vehicle Exterior _075549 LIGHTING (EXT) _0368407 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Headlight Assembly LH Headlight ECU Sub-assembly LH
·

Receives various signals and controls the headlight leveling motor.

·

Sends headlight leveling motor operation signals to the headlight ECU sub-assembly RH.


Headlight Assembly RH Headlight ECU Sub-assembly RH Controls the headlight leveling motor according to control signals from the headlight ECU sub-assembly LH.
Rear Height Control Sensor Sub-assembly LH Detects the vehicle height value and transmits a signal to the headlight ECU sub-assembly LH.
Turn Signal Switch Light Control Switch Sends the light control switch position signal to the steering sensor.
Steering Sensor Sends the light control switch position signal to the main body ECU.
Main Body ECU (Multiplex Network Body ECU) Receives a light control signal and transmits it to the headlight ECU sub-assembly LH.
Skid Control ECU Sends the vehicle speed signal to the main body ECU.
Combination Meter Assembly Sends the vehicle speed signal to the headlight ECU sub-assembly LH.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.


SYSTEM CONTROL


a.

The headlight ECU sub-assembly LH receives vehicle height change signals sent from the rear height control sensor sub-assembly and calculates the changes in the pitch angle of the vehicle. The headlight ECU sub-assembly LH/RH drives the headlight leveling motor LH/RH in accordance with the change.

Control Mode Details
While Stopped If the vehicle attitude is stable for approximately 3 seconds with the headlights on while stopped, the headlight ECU sub-assembly LH/RH operates the headlight leveling motor LH/RH in accordance with the detected change in vehicle attitude.



FUNCTION


a.

The rear height control sensor sub-assembly detects changes in the vehicle's rear ride height due to cargo loads etc., and operates the headlight leveling motor RH/LH in accordance with the changes, keeping the headlight axes at a constant angle.


b.

Combination Meter Assembly

i.

When a malfunction occurs in the automatic headlight beam level control system, the buzzer sounds, and the "Headlight System Malfunction Visit Your Dealer" warning message is displayed on the multi-information display.




FAIL-SAFE


a.

If the headlight ECU sub-assembly detects a malfunction in the automatic headlight beam level control system, the headlight ECU sub-assembly performs the fail-safe operation.