FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with nozzle heater *2: Models with washer fluid level warning *3: Models with rain sensing function *4: Models with vehicle speed-sensing, adjustable interval function without rain sensing function *5: HV models *6: Gasoline models |
||
| Windshield Wiper Motor Assembly | Operates the wipers according to control performed by the windshield wiper relay assembly. | |
| Rear Wiper Motor Assembly | RR Wiper Relay | Receives rear wiper operation request signals from the main body ECU and operates the RR wiper motor. |
| RR Wiper Motor | Operates the rear wipers according to control performed by the RR wiper relay. | |
| Windshield Wiper Relay Assembly | ·
Receives front washer or rear washer spray request signals from the main body ECU and operates the windshield washer motor and pump assembly. ·
Receives front wiper operation request signals from the main body ECU and operates the windshield wiper motor assembly. |
|
| Washer Nozzle Heater Assembly*1 | Operates the PTC heater according to nozzle heater relay signals to prevent the washer fluid from freezing. | |
| Nozzle Heater Relay*1 | Receives nozzle heater operation request signals from the main body ECU and operates the washer nozzle heater assembly. | |
| Windshield Washer Jar Assembly | Windshield Washer Motor and Pump Assembly | Activates in accordance with the signal from the windshield wiper relay assembly. |
| Level Warning Switch Assembly*2 | Outputs signals to the combination meter when the remaining amount of washer fluid is equal to or less than the specified value. | |
| Main Body ECU (Multiplex Network Body ECU) | ·
Receives information from ECUs and sensors and sends front wiper operation request signals to the windshield wiper relay assembly. ·
Receives information from ECUs and sensors and sends washer pump operation request signals to the windshield wiper relay assembly. ·
Receives information from ECUs and sensors and sends rear wiper operation request signals to the RR wiper relay. ·
Receives information from ECUs and sensors and sends washer nozzle heater operation request signals to the nozzle heater relay.*1 |
|
| Rain Sensor*3 | Senses rain when the AUTO switch (windshield wiper switch assembly) is on, and sends signals to the main body ECU. | |
| Windshield Wiper Switch Assembly | FR Wiper Control Switch | Sends the switch position signal to the steering sensor. |
| RR Wiper Control Switch | ||
| Sensitivity Switch*3 | ||
| Interval Time Adjuster*4 | ||
| Washer Switch | ||
| Steering Sensor | Sends the wiper control switch, sensitivity switch*3, interval time adjuster*4 position and washer switch signal to the main body ECU. | |
| Combination Meter Assembly | ·
Sends the vehicle speed signal to the main body ECU. ·
Displays a warning message on the multi-information display when a low washer fluid level signal is received from the level warning switch assembly. |
|
| Air Conditioning Amplifier Assembly | Sends the ambient temperature signal to the main body ECU. | |
| Hybrid Vehicle Control ECU Assembly*5 | Sends the shift position signal to the main body ECU. | |
| ECM*6 | ||
| Skid Control ECU | Sends the vehicle speed signal to the combination meter assembly. | |
| Central Gateway ECU (Network Gateway ECU) | Relays signals between the CAN communication lines. | |
| DLC3 | The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. | |
FUNCTION
Mist Function
When the MIST switch (wiper control switch) is on, the wipers operate at LO.
Rain Sensing Function (Models with Rain Sensing Function)
When the AUTO switch (wiper control switch) is on, the rain sensor mounted on the upper area of the windshield detects the amount of rain and the luminance of the surrounding area. When the rain sensor detects rain, it sends an optimal wiper timing signal to the main body ECU in accordance with the vehicle speed, luminance of the surrounding area and the amount of rain detected.
The main body ECU changes the operation of the windshield wiper motor assembly as shown in the following table, based on wiper operation request signals sent from the rain sensor. If a wiper HI operation request signal is received due to a sudden increase of the amount of rain, such as a splash on the windshield, the wipers are operated continuously on HI.
The rain sensor detects the luminance of the surrounding area. If the luminance changes such as when the vehicle goes in or out of a tunnel, the rain sensor sends a wiper operation request signal in accordance with the situation, enabling the wipers to operate at a comfortable setting.
| Amount of Rain | While Being Driven | While Stopped |
|---|---|---|
| Large | Continuously (at HI) | Continuously (at LO) |
| ↓↑ | Continuously (at LO) | Continuously (at LO) |
| ↓↑ | Intermittently at Approximately 0.6-second Intervals | Intermittently at Approximately 0.8-second Intervals |
| ↓↑ | Intermittently at Approximately 1.2-second Intervals | Intermittently at Approximately 1.6-second Intervals |
| ↓↑ | Intermittently at Approximately 2.1-second Intervals | Intermittently at Approximately 3.1-second Intervals |
| ↓↑ | Intermittently at Approximately 3.5-second Intervals | Intermittently at Approximately 5.4-second Intervals |
| ↓↑ | Intermittently at Approximately 5.9-second Intervals | Intermittently at Approximately 9.7-second Intervals |
| ↓↑ | Intermittently at Approximately 10.1-second Intervals | Intermittently at Approximately 17.5-second Intervals |
| Small | Intermittently at Approximately 17.9-second Intervals | Intermittently at Approximately 32.7-Second Intervals |
| No detection | Not operated | Not operated |
Rain Sensor Sensitivity Adjustment Function (Models with Rain Sensing Function)
When the wiper control switch (windshield wiper switch assembly) is in AUTO, operating the sensitivity switch adjusts the sensitivity of the rain sensor to adjust the wiper operation timing.
When the sensitivity switch is operated to the sensitive side, the wipers operate once regardless of the amount of rain.
Washer-linked Wiper with Drip-prevention Function
When the washer switch is turned on with the windshield wiper switch assembly set to off or AUTO, the washer fluid sprays simultaneously. Once the washer switch is on for approximately 0.3 seconds or more, the wipers starts on LO approximately 0.2 seconds later.
When the washer switch is on, the wipers operate at a speed lower than LO.
If the washer switch is turned off before one complete wiper operation is performed, the wipers operate 2 times on LO.
If the washer switch is turned off after at least one complete wiper operation is performed, the wipers operate 3 times on LO.
When the washer switch is turned on for approximately 0.5 seconds or more and the vehicle speed is approximately 7 km/h (4 mph) or less, the wipers operate once more after the end of this operation as shown in the following diagram.
Vehicle Speed-Sensing, Adjustable Interval Function (Models with Vehicle Speed-Sensing, Adjustable Interval Function or Rain Sensing Function)
When the windshield wiper switch is in the INT*1 or AUTO*2 position, the interval time of the wiper is controlled in 3 stages in accordance with the automatic control adjuster position and the vehicle speed.
The interval time can be controlled steplessly within each range.
*1: Models without rain sensing function
*2: When a malfunction occurs in the rain sensing function of models with a rain sensing function.
Vehicle Speed Switching Function
When the windshield wiper switch is in the LO position and the vehicle stops moving, wiper operation is automatically switched to intermittent operation.
If the wiper control switch is changed from a position other than LO* to LO while the vehicle is stopped, the wipers operate 3 times, and then automatically switch to intermittent operation (the wipers operate at approximately 2.5-second intervals). Also, when the automatic control adjuster position is FAST, the wipers operate on LO even while the vehicle is stopped.
*: Except OFF
When the vehicle stops moving and the windshield wiper switch assembly is in the LO position, the wipers operate twice in LO. It then switches to intermittent operation with an interval time of approximately 2.5 seconds. If the vehicle starts moving during this intermittent wiper operation, the wiper automatically returns to LO operation. Also, when the automatic control adjuster position is FAST, the wipers operate on LO even while the vehicle is stopped.
Washer Fluid Level Warning (Models with Washer Fluid Level Warning)
When the remaining amount of washer fluid is equal to or less than the specified value, "Windshield Washer Fluid Low" is displayed on the multi-information display.
FAIL-SAFE
Rain Sensor
The windshield wiper switch assembly performs a fail-safe function when the wiper system cannot properly receive the necessary signals for wiper system control or a wiper system component is malfunctioning.