OUTLINE
Front Wiper and Washer System
The windshield wiper motor assembly and wiper link assembly are mounted in a modular frame, reducing wiper operation sound and reducing variations in the wiping range.
The rain sensing function is controlled by the windshield wiper relay assembly and rain sensor installed to the upper area of the windshield glass, which automatically operate the wipers when rain is detected.*1
The vehicle speed-sensing, adjustable interval function is controlled by the windshield wiper relay assembly, and it automatically changes the wiper operation interval time according to the vehicle speed and interval time adjuster.*2
Diffuser type washer nozzle sub-assemblies are provided under the engine hood to ensure a good appearance.
A graphite coating is applied to the surface of the wiper rubber, reducing inversion noise and wiper flutter while the wipers are operating.
*1: Models with rain sensing function
*2: Models with vehicle speed-sensing, adjustable interval function
A washer nozzle heater is used, depending on the models.
Rear Wiper System
The rear wiper system has a washer-linked wiper function and intermittent interval function.
By using a resin rear wiper arm, a unified rear wiper blade look has been achieved.
Headlight Cleaner System (Models with Headlight Cleaner System)
The headlight cleaner system is used.
A headlight cleaner system is used to allow optimal lighting effectiveness to be maintained.