Home › Engine / Hybrid System › A25A-FKS (FUEL) › FUEL SYSTEM
NM3620E _51 Engine / Hybrid System _075752 A25A-FKS FUEL _0371200 FUEL SYSTEM GE GENERAL F

A25A-FKS FUEL  FUEL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The A25A-FKS engine uses a Direct injection 4-stroke gasoline engine Superior version (D-4S) system, which has both direct and port type fuel injection.


b.

This system optimally controls the fuel injector assemblies for direct injection and port injection in accordance with engine load and engine speed. The system achieves improved engine performance, fuel economy, and clean emissions.


c.

A fuel returnless system is used to reduce evaporative emissions.


d.

Fuel cut control is used to stop the fuel pump (for low pressure side) if the Supplemental Restraint System (SRS) airbag is deployed.


e.

Direct fuel injector assemblies with a 6-hole type nozzle are used.


f.

The fuel tank uses a saddle shape to allow the propeller shaft to pass under the center portion of the tank. Also, a jet pump is used to transfer the fuel from the side of the tank which does not have a fuel pump to the side which does have a fuel pump.



MAIN FEATURES


a.

D-4S System

i.

The Direct injection 4-stroke gasoline engine Superior version (D-4S) system is based on 2 types of fuel injection systems: the direct injection system and the port injection system. Fuel sent from the fuel tank assembly is delivered to the low-pressure and high-pressure fuel systems. The fuel delivered to the low-pressure fuel system is injected from the port fuel injector assembly to the intake port. The fuel delivered to the high-pressure fuel system is pressurized by the fuel pump assembly (for high pressure side) and injected from the direct fuel injector assembly to the combustion chamber.


ii.

The direct injection system mainly consists of the fuel pump assembly (for high pressure side), fuel delivery pipe (for high pressure side) and direct fuel injector assembly. In this system, the ECM controls the fuel pump assembly (for high pressure side) and direct fuel injector assembly based on signals from various sensors, thus optimally controlling fuel pressure, injection volume, and injection timing.


iii.

The port injection system mainly consists of the fuel pump (for low pressure side), fuel delivery pipe with sensor sub-assembly (for low pressure side), and port fuel injector assembly. In this system, the ECM controls the port fuel injector assembly based on signals from various sensors, thus optimally controlling injection volume and timing.

W142180C01
4.948,0.729 5.125,0.292 true 5.417,0.823 5.594,0.417 true 5.604,1.115 5.958,1.115 true 5.583,1.938 5.844,1.635 true 5.615,2.219 5.781,2.458 true 2.302,5.563 1.865,5.979 true 2.146,4.958 1.813,4.635 true 3.198,4.938 2.729,5.49 true 3.354,6.073 2.875,5.813 true 4.052,4.281 4,4.563 4,4.563 3.823,4.563 true 4.146,1.938 3.906,1.677 true 1.125,1.417 1.438,1.573 0.313,0.156 10 false *1 5.073,0.125 5.385,0.281 0.313,0.156 10 false *2 5.563,0.25 5.875,0.406 0.313,0.156 10 false *3 6,1.052 6.313,1.208 0.313,0.156 10 false *4 3.781,1.521 4.094,1.677 0.313,0.156 10 false *5 5.833,1.5 6.146,1.656 0.313,0.156 10 false *6 5.771,2.49 6.083,2.646 0.313,0.156 10 false *7 1.208,3.531 1.521,3.688 0.313,0.156 10 false *8 0.458,4.865 0.771,5.021 0.313,0.156 10 false *9 1.573,4.5 1.854,4.729 0.281,0.229 10 false *10 1.656,6 1.99,6.281 0.333,0.281 10 false *11 3.198,4.813 3.458,5.042 0.26,0.229 10 false *12 3.406,6.052 3.688,6.313 0.281,0.26 10 false *13 4.052,3.771 4.406,4 0.354,0.229 10 false *14 3.583,4.5 3.958,4.75 0.375,0.25 10 false *15 4.104,4.385 4.469,4.635 0.365,0.25 10 false *16 4.792,3.958 5.167,4.219 0.375,0.26 10 false *17 5.427,4.375 5.771,4.615 0.344,0.24 10 false *18 4.5,6.021 4.875,6.271 0.375,0.25 10 false *20 5.469,5.167 5.792,5.385 0.323,0.219 10 false *19
*1 ECM *2 Fuel Pressure Sensor (for High Pressure Side)
*3 Fuel Delivery Pipe (for High Pressure Side) *4 Direct Fuel Injector Assembly
*5 Fuel Pressure Sensor (for Low Pressure Side) *6 Fuel Delivery Pipe (for Low Pressure Side)
*7 Port Fuel Injector Assembly *8 Fuel Pump Control ECU
*9 Fuel Tank Assembly *10 Fuel Main Valve Assembly (for High Pressure)
*11 Jet Pump *12 Fuel Pump (for Low Pressure Side)
*13 Fuel Filter *14 Fuel Pump Assembly (for High Pressure Side)
*15 Fuel SUS Filter *16 Fuel Pressure Pulsation Damper
*17 Spill Control Valve *18 Check Valve (60 kPa)
*19 Fuel Relief Valve (26.4 MPa) *20 Exhaust Camshaft (Cam to Drive Fuel Pump)