Home › Engine / Hybrid System › A25A-FKS (IDLING STOP CONTROL) › STOP AND START
NM3620E _51 Engine / Hybrid System _075758 A25A-FKS IDLING STOP CONTROL _0371223 STOP AND START GE GENERAL F

A25A-FKS IDLING STOP CONTROL  STOP AND START  GENERAL  GENERAL  


OUTLINE


a.

To achieve low emissions and enhanced fuel economy, the stop and start system has been developed.


b.

The stop and start system automatically stops the engine when the vehicle comes to a stop, such as when the vehicle stops at a red traffic light. When starting off, the engine is automatically restarted without requiring any extra activity from the driver.

Y140861E17
1.542,0.417 2.333,0.635 0.792,0.219 10 false Deceleration 2.625,0.417 3.5,0.667 0.875,0.25 10 false Vehicle Stop 3.802,0.417 4.51,0.667 0.708,0.25 10 false Idling Stop 4.76,0.417 5.76,0.667 1,0.25 10 false Engine Restart 5.938,0.417 6.771,0.667 0.833,0.25 10 false Acceleration 0.417,1.635 1.25,1.885 0.833,0.25 10 false Brake Pedal 0.448,2.271 1.198,2.667 0.75,0.396 10 false Accelerator Pedal 0.479,3.375 1.188,3.854 0.708,0.479 10 false Shift Lever Position 1.802,3.5 1.958,3.688 0.156,0.188 10 false D 2.896,3.5 3.052,3.708 0.156,0.208 10 false D 4.01,3.5 4.188,3.698 0.177,0.198 10 false D 5.125,3.5 5.302,3.698 0.177,0.198 10 false D 6.25,3.5 6.417,3.677 0.167,0.177 10 false D 2.073,1.583 2.75,1.854 0.677,0.271 10 true Depressed 2.24,2.563 2.865,2.823 0.625,0.26 10 true Released 5.521,1.76 6.146,2.021 0.625,0.26 10 true Released 5.458,2.365 6.135,2.635 0.677,0.271 10 true Depressed


c.

The stop and start system consists of an engine stop and start ECU, backup boost converter and tandem solenoid starter assembly.


d.

The adoption of the tandem solenoid starter assembly enables the engine to start even when the engine is still rotating under inertia.


e.

Based on signals from various sensors, switches, and the ECM, the engine stop and start ECU controls the stopping and starting of the engine.


f.

When the engine is stopped, the ECM stores the crankshaft angle. This is used to determine which cylinder to inject fuel into and ignite the next time the engine is restarted. This shortens the amount of time necessary to restart the engine.


g.

To allow management of the lifespan of the starter assembly, the engine stop and start ECU counts the number of times the starter operates. If the number exceeds a threshold, the ECU blinks the stop and start cancel indicator light to inform the driver that a replacement is required.

HINT:

After the starter assembly has been replaced, it is necessary to clear the record of the number of times that the starter assembly has been operated. For details, refer to the Repair Manual.



h.

During idling stop, the oil pump with solenoid assembly operates to ensure a stable ATF pressure, achieving a smooth start off.


i.

A hill-start assist function is provided in order to assist smooth starting on a slope while the engine is restarted after idling stop. The skid control ECU retains the brake hydraulic pressure until sufficient driving force is generated.


j.

Operating conditions of the stop and start system, such as the amount of time idling stop was performed, and various advice and warnings are provided using the multi-information display, stop and start indicator light and stop and start cancel indicator light in the combination meter assembly.


k.

An operation limit which prohibits stop and start system control under certain conditions is provided to protect the battery when a non-specified battery is used.


l.

Through the use of a high performance battery and high-precision battery sensor (battery state sensor assembly), the amount of time until the threshold value for idle stop prohibition is reached has been extended and the idle stop operation permission range has been expanded.


m.

Stop and start operation time when the air conditioning is operating can be changed between "Standard" and "Extended (the stop and start system has priority)" by using the steering pad switch located on the steering pad, enabling the user to select the preferred setting.


n.

When a stop sign is recognized by the system, the engine stop operation is delayed according to the idling stop function. As a result, the frequency at which the engine is stopped is reduced. The system cooperates with the Road Sign Assist (RSA) system and contributes to enhanced driving comfort. (models with RSA)



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)