OPERATING CONDITION
Engine stop and start ECU actuates the electric oil pump for CVT when it receives an engine stop signal and the following condition is met. The electric oil pump for CVT will stop operating when the engine automatically starts and the engine speed exceeds a specified value.
| Shift Position | P | R | N | D | M |
|---|---|---|---|---|---|
| Brake On (applied) | - | - | - | ○ | - |
| Brake Off (not applied) | - | - | - | - | - |
○: Operating
-: Idle stop is disabled
| Item | Condition | Remarks |
|---|---|---|
| CVT Oil Temperature | 25°C to 109°C (77°F to 228°F) | Detected from the CVT Fluid Temperature Sensor |
SYSTEM CONTROL
Because the engine stop and start ECU operates the electric oil pump for CVT during idle stop, a stable CVT oil pressure is ensured, enabling a smooth vehicle start.
During idle stop, the oil pressure generated by the electric oil pump for CVT is maintained at optimal pressure by the standby pressure optimization control that has been adopted.
The standby pressure that is necessary for the vehicle to maintain its starting responsiveness during idle stop condition is controlled at an optimal pressure, reducing wasted electricity to improve fuel efficiency while also ensuring reliability.
The engine stop and start ECU judges whether there is a malfunction in the electric oil pump for CVT based on pump rotation frequency.
Malfunctions in the electric oil pump for CVT are recorded as DTCs, and idle stop control is prohibited.