Home › Power Source / Network › BATTERY / CHARGING › CHARGING SYSTEM (for Gasoline Model)
NM3620E _57 Power Source / Network _075760 BATTERY / CHARGING _0371226 CHARGING SYSTEM(for Gasoline Model) DE DETAILS F

BATTERY / CHARGING  CHARGING SYSTEM(for Gasoline Model)  DETAILS  BATTERY SENSOR  


CONSTRUCTION


a.

The battery state sensor assembly is installed to the negative (-) battery terminal and outputs the state of the battery based on the input/output current, voltage, temperature, SOC (State of Charge), SOH (State of Health), SOF (State of Function) and self-diagnosis results to the ECM via LIN communication.


b.

To detect the current, a shunt resistor installed inside the battery state sensor assembly is used to convert and calculate the voltage generated in the shunt resistor due to the battery charge and discharge current.


c.

The battery temperature is calculated from the resistance value of the thermistor built in the battery state sensor assembly.

W136333E05
0.573,3.354 2.625,3.594 2.052,0.24 10 false : LIN communication line 2.104,1.042 2.594,1.292 0.49,0.25 10 false IC Chip 4.521,0.542 5.396,1.01 0.875,0.469 10 false ECM 5.49,3.365 6.292,3.635 0.802,0.271 10 false Battery 1.521,2.802 3.531,3.104 2.01,0.302 10 false Battery State Sensor Assembly 1.875,2.344 2.854,2.635 0.979,0.292 10 false Shunt Resistor