CONSTRUCTION
FD13AE Type Rear Differential
The electromagnetic control coupling is placed in front of the differential.
A differential carrier and a differential retainer made of aluminum are used for weight reduction.
| *1 | Transmission Coupling Assembly | *2 | Rear Differential Retainer |
| *3 | Rear Differential Case | *4 | Rear Drive Shaft |
| *5 | Ring Gear | *6 | Pinion Gear |
| *7 | Side Gear | *8 | Rear Differential Carrier |
| *9 | Rear Drive Pinion | - | - |
| *a | Electromagnetic Control Coupling Portion | - | - |
FD15EF Type Rear Differential
The electromagnetic control coupling is placed to the left and right of the differential.
A large diameter unit ball bearing is used in the support portion of the ring gear. This allows the disconnect mechanism to be placed inside the ring gear, achieving size and weight reductions.
| *1 | Electro Magnetic Control Coupling Sub-Assembly | *2 | Ball Bearing |
| *3 | Ring Gear | - | - |
| *a | Electromagnetic Control Coupling Portion | - | - |