Home › Engine / Hybrid System › M20A-FKS EMISSION CONTROL › EVAPORATIVE EMISSION CONTROL SYSTEM
NM3620E _51 Engine / Hybrid System _076576 M20A-FKS EMISSION CONTROL _0373052 EVAPORATIVE EMISSION CONTROL SYSTEM CO CONTROL F

M20A-FKS EMISSION CONTROL  EVAPORATIVE EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the evaporative emission control system are as follows:

Component Function
Canister Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank assembly.
Purge VSV Opens in accordance with the signals from the ECM when the system is purging in order to send the fuel vapor that was absorbed by the canister into the intake manifold.
ECM Controls the purge VSV in accordance with the signals from various sensors in order to achieve a purge volume that suits the driving conditions.



SYSTEM CONTROL


a.

Based on the signals from various sensors, the ECM opens and closes the purge VSV. As a result, it controls the purge flow of evaporative emissions (HC) in the canister in accordance with the engine operating conditions.