FUNCTION
|
*1: Models with parking assist monitor system or panoramic view monitor system *2: Models with blind spot monitor system *3: Models with Toyota Safety Sense *4: Models with Toyota parking assist-sensor system *5: Models with panoramic view monitor system *6: Models with grille shutter system *7: Models with CVT *8: Models with stop and start system *9: Models with multimedia system or navigation system *10: Models with bus buffer ECU *11: Models with DCM *12: Models with occupant classification system *13: 4WD/AWD models *14: RHD models with power seat (for memory function) *15: Models with entry and start system *16: LHD models with power seat (for memory function) *17: Models with power back door system |
|
| Television Camera Assembly*1 | Blind Spot Monitor Sensor LH*2 |
| Forward Recognition Camera*3 | Millimeter Wave Radar Sensor Assembly*3 |
| Clearance Warning ECU Assembly*4 | Parking Assist ECU*5 |
| Swing Grille Actuator Assembly*6 | Central Gateway ECU (Network Gateway ECU) |
| Transmission Control ECU*7 | Engine Stop and Start ECU*8 |
| ECM | Radio and Display Receiver Assembly*9 |
| Bus Buffer ECU*10 | DCM (Telephone Transceiver Assembly)*11 |
| Occupant Detection ECU*12 | Steering Sensor |
| Power Steering ECU | 4WD ECU Assembly*13 |
| Skid Control ECU | Airbag ECU (Airbag Sensor Assembly) |
| Position Control ECU Assembly RH*14 | Headlight ECU Sub-assembly RH |
| Main Body ECU (Multiplex Network Body ECU) | Certification ECU (Smart Key ECU Assembly)*15 |
| Air Conditioning Amplifier Assembly | Position Control ECU Assembly LH*16 |
| Power Back Door ECU (Multiplex Network Door ECU)*17 | Headlight ECU Sub-assembly LH |
| Combination Meter Assembly | DLC3 |
| Blind Spot Monitor Sensor RH*2 | - |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.
For details, refer to the Repair Manual.