FUNCTION OF MAIN COMPONENTS
The main components have the following functions:
| Component | Function |
|---|---|
|
*1: Models with HI/LO type front seat heater system *2: Models with HI/MID/LO type front seat heater system *3: Models with rear seat heater system |
|
| Seat Heater Assembly | The seat heater is sewn into the internal surfaces of the seat cushion and the seat back. It warms up the seat surfaces using the heat caused by electrical resistance. |
| Seat Heater Switch (LH/RH) | ·
By operating this switch, the HI/LO type front seat heater system is turned HI or LO.*1 ·
By operating this switch, the HI/MID/LO type front seat heater system is turned HI, MID or LO.*2 |
| Seat Heater (Rear) Switch (LH/RH)*3 | By operating this switch, the rear seat heater system is turned on. |
| Air Conditioning Amplifier Assembly | ·
Receives the HI/MID/LO type front seat heater switch on signal, the air conditioning amplifier assembly turns on HI/MID/LO type front seat heater.*2 ·
Receives the rear seat heater switch on signal, the air conditioning amplifier assembly turns on the rear seat heater.*3 |
| Seat Heater Control Sub-assembly LH/RH*2 | Operates the HI/MID/LO type front seat heater system in accordance with the signals from the air conditioning amplifier assembly. |
| Air Conditioning Control Panel | Sends rear seat heater on signals to the air conditioning amplifier assembly via LIN communication.*3 |
FUNCTION
Front Seat Heater System (Models with HI/LO Type Front Seat Heater System)
The seat heater system is operated by pressing the seat heater switch (LH/RH).
The power switch is tuned On (IG). (HV models)
The ignition switch is tuned ON. (Gasoline models)
When the HI or LO switch of the seat heater switch assembly LH/RH is operated, the front seat heater system temperature is adjusted to 2 different levels.
Front Seat Heater System (Models with HI/MID/LO Type Front Seat Heater System)
The seat heater system is operated by pressing the seat heater switch (LH/RH).
The power switch is tuned On (IG). (HV models)
The engine switch is tuned On (IG). (Gasoline models)
Each time the seat heater switch assembly LH/RH (refreshing seat switch) is pressed, the front seat heater temperature is adjusted to 3 different levels (HI/MID/LO).
Rear Seat Heater System (Models with Rear Seat Heater System)
The rear seat heater system is operated by pressing the seat heater (rear) switch (LH/RH)
The power switch is tuned On (IG). (HV models)
The engine switch is tuned On (IG). (Gasoline models)
An indicator light is provided on the top part of the seat heater (rear) switch (LH/RH), allowing the user to confirm the operation condition of the rear seat heater.