Home › General › INTRODUCTION › FEATURES › 2018.10–2019.02
NM3620E _V1 General _076837 INTRODUCTION _0374394 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

TOYOTA Hybrid System-II (THS-II) (for HV Models)

i.

This system optimally performs cooperative control of the A25A-FXS engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P710 hybrid vehicle transaxle assembly that provides excellent transmission performance.


ii.

The system has 2 batteries, which are used for different purposes. One is the HV battery (nominal voltage of DC 244.8 V) which stores electrical power to drive the vehicle, and the other is the auxiliary battery (nominal voltage of DC 12 V) which supplies electrical power to the electrical components.


iii.

Furthermore, this system uses a variable-voltage system consisting of the high-output HV battery (nominal voltage of DC 244.8 V), a boost converter that boosts the operating voltage of MG1 and MG2 to a maximum voltage of DC 650 V, and an inverter which converts direct current and alternating current.

W141294C01
2.042,2.896 2.365,0.635 true 1.646,2.667 0.948,1.271 true 2.104,4.365 1.958,3.365 true 4.854,3.885 4.333,2.552 true 6.292,3.625 5.167,1.833 true 2.302,0.438 2.615,0.594 0.313,0.156 10 false *1 0.833,1.094 1.094,1.26 0.26,0.167 10 false *2 2.063,4.417 2.375,4.573 0.313,0.156 10 false *3 4.844,3.927 5.156,4.083 0.313,0.156 10 false *4 6.292,3.656 6.604,3.813 0.313,0.156 10 false *5
*1 Inverter with Converter Assembly
·

Inverter

·

Boost Converter

·

DC-DC Converter


*2 A25A-FXS Engine
*3 P710 Hybrid Vehicle Transaxle Assembly
·

Motor Generator No. 1 (MG1)

·

Motor Generator No. 2 (MG2)


*4 HV Battery
*5 Auxiliary Battery - -




b.

A25A-FXS Engine (for HV Models)

i.

The A25A-FXS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine.


ii.

The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.

Engine Type A25A-FXS
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i)
Displacement cm3 (cu. in.) 2487 (151.8)
Max. Output (EEC) kW@rpm 131@5700
Max. Torque (EEC) N*m@rpm 221@3600 to 5200



c.

A25A-FKS Engine (for Gasoline Models)

i.

The A25A-FKS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine.


ii.

The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.

Engine Type A25A-FKS
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i)
Displacement cm3 (cu. in.) 2487 (151.8)
Max. Output (EEC) kW@rpm 152@6600
Max. Torque (EEC) N*m@rpm 243@4000 to 5000



d.

M20A-FKS Engine (for Gasoline Models)

i.

The M20A-FKS engine is an in-line 4-cylinder, 2.0 liter, 16 valve DOHC engine.


ii.

The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.

Engine Type M20A-FKS

*1: Models with Gasoline Particulate Filter (GPF) system

*2: Models without Gasoline Particulate Filter (GPF) system

No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i)
Displacement cm3 (cu. in.) 1987 (121.3)
Max. Output (EEC) kW@rpm 129@6600*1
127@6600*2
Max. Torque (EEC) N*m@rpm 208@4300 to 5200*1
203@4400 to 4900*2



e.

Hybrid Vehicle Transaxle (for HV Models)

i.

The P710 hybrid transaxle is used on models with A25A-FXS engine.



f.

Manual Transaxle (for Gasoline Models)

i.

The EG62 or EG62F 6-speed manual transaxle is used on models with M20A-FKS engine.



g.

Continuously Variable Transaxle (CVT) (for Gasoline Models)

i.

The K120 or K120F Continuously Variable Transaxle (CVT) is used on models with M20A-FKS engine.



h.

Automatic Transaxle (for Gasoline Models)

i.

The UB80E or UB80F 8-speed automatic transaxle is used on models with A25A-FKS engine.



i.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A double-wishbone type independent suspension is used for the rear.



j.

Front Brake

i.

A ventilated disc brake is provided for the front brake.



k.

Rear Brake

i.

A ventilated disc brake or a solid disc brake is provided for the rear brake.



l.

Brake Control System

i.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Active Cornering Assist (ACA), steering cooperative control, trailer sway control, hill-start assist control, downhill assist control and brake hold.



m.

Parking Brake

i.

An electric parking brake system is provided.



n.

Steering

i.

A rack and pinion type steering gear assembly is used.


ii.

An Electric Power Steering (EPS) system is used.


iii.

A manual tilt and manual telescopic system is used.


iv.

A heated steering wheel system is used.



o.

Drive Mode Select (for HV Models)

i.

The drive mode select is a function where control characteristics switches of the powertrain (hybrid control system), chassis [Electric Power Steering (EPS) system] and air conditioning (air conditioning system) are integrated. This function optimally controls each system according to the driving mode selected by the driver.

W141737C01
0.385,0.542 0.729,0.76 0.344,0.219 11 false *1
*1 Drive Mode Select - -



ii.

Each drive mode of the drive mode select is provided with the following control characteristics:

Drive Mode Powertrain Chassis Air Conditioning
Hybrid Control System EPS System Air Conditioning System
Normal Normal Normal Normal
Eco Eco Normal Eco
Sport Power Sport Normal


iii.

The control characteristics in each drive mode are as follows:

Drive Mode Control Characteristics
Normal Performs control for normal driving.
Eco Performs control for driving with improved fuel efficiency by generating torque more gently than Normal mode according to accelerator pedal depression while suppressing air conditioning cooling and heating operations.
Sport Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission and hybrid control system and also improving the steering feeling.



p.

Drive Mode Select (for Gasoline Models)

i.

The drive mode select is a function where control characteristics switches of the powertrain (engine control system, transmission control system*), chassis [Electric Power Steering (EPS) system] and air conditioning (air conditioning system) are integrated. This function optimally controls each system according to the driving mode selected by the driver.

*: Except models with manual transaxle


Except Models with Manual Transaxle
W141739C01
0.385,0.542 0.729,0.76 0.344,0.219 11 false *1
*1 Drive Mode Select - -


Models with Manual Transaxle
W141738C01
0.385,0.542 0.729,0.76 0.344,0.219 11 false *1
*1 Drive Mode Select - -



ii.

Each drive mode of the drive mode select is provided with the following control characteristics:

Drive Mode Powertrain Chassis Air Conditioning
Engine Control System Transmission Control System* EPS System Air Conditioning System

*: Except models with manual transaxle

Normal Normal Normal Normal Normal
Eco Eco Eco Normal Eco
Sport Power Power Sport Normal


iii.

The control characteristics in each drive mode are as follows:

Drive Mode Control Characteristics

*: Except models with manual transaxle

Normal Performs control for normal driving.
Eco Performs control for driving with improved fuel efficiency by generating torque more gently than Normal mode according to accelerator pedal depression while suppressing air conditioning cooling and heating operations.
Sport Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission* and engine and also improving the steering feeling.



q.

AIM (for 4WD/AWD Models)

i.

AWD Integrated Management (AIM) ensures superior driving stability according to the road surface by performing integrated engine, transmission, brake and 4WD/AWD control when "MUD & SAND" or "ROCK & DIRT" is selected by multi-terrain select.