FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: HV models *2: Gasoline models *3: Models with manual transaxle *4: Models with Toyota parking assist-sensor system *5: Models with RCTA function |
|
| Television Camera Assembly | ·
Captures images of the area behind the vehicle. ·
The parking assist guide lines that are calculated based on signals from the steering sensor are superimposed on the captured image. Then, the image is sent to the radio and display receiver assembly as video signals. ·
When the back door is open, superimposing of parking assist guide lines is canceled and only the captured image is sent as video signals. |
| Radio and Display Receiver Assembly | ·
Receives visual signals composed of the area behind the vehicle with parking assist guide lines overlaid from the television camera assembly, and displays them. ·
Sends signals indicating a mode change in parking guide line display functions to the television camera assembly. |
| Steering Sensor | Detects the direction and angle of the steering wheel and sends the resulting signals to the television camera assembly. |
| Hybrid Vehicle Control ECU*1 | Sends a shift position signal to the television camera assembly. |
| ECM*2 | |
| Back-up Light Switch Assembly*3 | Sends the on/off signals of the back-up light switch assembly to the radio and display receiver assembly. |
| Main Body ECU (Multiplex Network Body ECU) | Sends the back door condition signal to the television camera assembly. |
| Clearance Warning ECU Assembly*4 | Sends a Toyota parking assist-sensor system information signal to the television camera assembly. |
| Blind Spot Monitor Sensor LH*5 | Sends a RCTA function information signal to the television camera assembly. |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. |
| DLC3 | The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. |
OPERATING CONDITION
The parking assist monitor system operates when both of the following conditions are met:
·
Power switch is turned on (IG). (HV models) ·
Ignition switch is turned ON. (Gasoline models) ·
The shift position is R. |
SYSTEM CONTROL
The television camera assembly combines guide lines and an image to the rear of the vehicle captured and outputs a video signal to the radio and display receiver assembly.
2 types of screen modes are provided: rear view mode and wide rear view mode. Rear view mode helps the safety confirmation when parking. Wide rear view mode helps the safety confirmation in left and right directions during start-off using the wide visible area.
Estimated course line display mode, parking assist guide line display mode and distance guide line display mode are provided for guide line display mode.
| Guide Line Display Mode | Outline |
|---|---|
| Estimated Course Line Display Mode | Estimated course lines are displayed which move in accordance with the operation of the steering wheel. |
| Parking Assist Guide Line Display Mode | The steering wheel return points (parking assist guide line) are displayed. |
| Distance Guide Line Display Mode | Distance guide lines only are displayed. |
The illustration shown is an example only. The illustration may differ from the actual vehicle screen.
The illustration shown is an example only. The illustration may differ from the actual vehicle screen.
| No. | Item | Description |
|---|---|---|
|
*1: Models with RCTA function *2: Models with Toyota parking assist-sensor system |
||
| (1) | Estimated Course Line (Yellow) | Moves in sync with the steering wheel to indicate the estimated reverse course of the vehicle. |
| (2) | RCTA Icon*1 | If a vehicle in the rear side direction is detected when the blind spot monitor system (RCTA function) is activated, the RCTA icon is displayed. |
| (3) | Display Mode Switching Button | The rear view mode and the wide rear view mode are switched. |
| (4) | Distance Guide Line (Red) | Moves together with estimated course lines in sync with the steering wheel. The center of the line indicates a position on the ground approximately 0.5 m (1.6 ft.) behind the rear bumper. |
| (5) | Distance Guide Line (Blue) | Indicates a position on the ground approximately 0.5 m (1.6 ft.) behind the rear bumper. |
| (6) | Guide Line Switching Button | Select to switch the guide line mode. |
| (7) | Vehicle Width Guide Line (Blue) | Indicates the estimated vehicle width. |
| (8) | Toyota Parking Assist-sensor System Icon*2 | If a stationary object is detected when the Toyota parking assist-sensor system is activated, the approximate distance between the vehicle and the stationary object is displayed. |
| (9) | Distance Guide Line (Yellow) | Moves together with estimated course lines in sync with the steering wheel. The center of the line indicates a position on the ground approximately 1.0 m (3.3 ft.) behind the rear bumper. |
| (10) | Parking Assist Guide Line (Blue) | Indicates the path the vehicle will follow if the driver turns the steering wheel fully. |
| (11) | Vehicle Center Guide Line (Blue) | Indicates the estimated position on the ground of the center of the vehicle. |
Estimated Course Line Display Mode
The estimated course lines inform the driver of the steering angle when driving in reverse. By driving the vehicle in reverse while steering to match the estimated course lines with the parking space boundary line, the vehicle can be guided into the parking space.
The vehicle width guide lines can be used to determine whether the vehicle is parked straight in the parking space by confirming whether the parking space boundary line and vehicle width extension lines are crossed or parallel.
| *a | Vehicle Width Guide Line | *b | Estimated Course Line |
| *c | Painted Line of the Parking Space | *d | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. |
Parking Assist Guide Line Display Mode
The parking assist guide lines inform the driver of a part outside of the estimated course lines when the steering wheel is fully turned while driving in reverse. By driving the vehicle in reverse to the desired parking position that matches the parking guide lines with the parking space boundary line, sides of the road, etc., the vehicle can be guided to an appropriate position to start turning the steering wheel.
| *a | Parking Assist Guide Line | *b | Painted Line of the Parking Space |
| *c | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. | - | - |
| *a | Parking Assist Guide Line | *b | Shoulder and Parking Space Lines, etc. |
| *c | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. | - | - |
DIAGNOSIS
In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). Refer to the Repair Manual for details.