CONSTRUCTION
Multi-information Display
Display Function Flow
The multi-information display can be switched as shown in the flow chart below:
|
*1: HV models *2: Gasoline models |
|
| *A | Models with Toyota Safety Sense or Navigation System |
| *B | Models with Multimedia System or Navigation System |
| *a | Conditions are not met. |
| *b | Conditions are met. |
| *c | If there are multiple display requests, items will be displayed in sequence. |
| *d | Item or display is selected by operating the steering pad switch assembly. |
| *e | ODO display is displayed for a certain period of time after the power switch is turned off*1 or ignition switch is turned off*2. |
| *f | Power switch off to on (IG)*1 or ignition switch off to ON*2. |
| *g | Power switch on (IG) to off*1 or ignition switch ON to off*2 (Conditions are not met). |
| *h | Power switch on (IG) to off*1 or ignition switch ON to off*2 (Conditions are met). |
Display Tab Operation
The information currently displayed can be switched using the LEFT/RIGHT switch of the steering pad switch assembly.
| *A | Models with Toyota Safety Sense or Navigation System | *B | Models with Multimedia System or Navigation System |
| *a | Fuel Economy Tab | *b | Driving Assist System Information Tab |
| *c | Audio Information Tab | *d | Vehicle Information Tab |
| *e | Settings Tab | *f | Warning Message Tab |
| *g | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. | - | - |
|
RIGHT switch operation |
|
LEFT switch operation |
Setting Function
The items displayed on the multi-information display can be customized.
The following items can be selected on the information setting screen.
| Item | Available Setting |
|---|---|
| On the hour setting | ·
Sets the minute display to "00" via the enter switch on the steering pad switch.
|
| Clock | Select to adjust clock of the combination meter. |
| Item | Available Setting | |
|---|---|---|
|
*1: Models with lane departure alert system *2: Models with lane tracing assist system |
||
| LDA*1/LTA*2 | Lane Center*2 | Center trace function can be set to on/off: -
ON -
OFF |
| Steering Assist | Setting for steering assist can be set to on/off: -
ON -
OFF |
|
| Sensitivity | Sensitivity of alert system can be changed: -
High (Icon is displayed) -
Standard (Icon is displayed) |
|
| Sway Warning | Sway warning function can be set to on/off: -
ON -
OFF |
|
| Sway Sensitivity | Sway warning sensitivity can be selected: -
High (Icon is displayed) -
Standard (Icon is displayed) -
Low (Icon is displayed) |
|
| Item | Available Setting | |
|---|---|---|
| PCS | The pre-collision system can be set to on/off: -
ON -
OFF |
|
| Sensitivity | Pre-collision system warning sensitivity can be selected: -
Far (Icon is displayed) -
Middle (Icon is displayed) -
Near (Icon is displayed) |
|
| Item | Available Setting | |
|---|---|---|
| BSM | The blind spot monitor system can be set to on/off: -
ON -
OFF |
|
| Brightness | Brightness of the outer rear view mirror indicator light can be changed: -
Bright (Icon is displayed) -
Dim (Icon is displayed) |
|
| Sensitivity | Blind spot monitor system sensitivity can be selected: -
Early (Icon is displayed) -
Middle (Icon is displayed) -
Later (Icon is displayed) -
Only blind spots (Icon is displayed) |
|
| Item | Available Setting | |
|---|---|---|
| Toyota Parking Assist-sensor System | The Toyota parking assist-sensor system can be set to on/off: -
ON -
OFF |
|
| Volume | The volume of the warning buzzer can be selected: -
1 (Icon is displayed) -
2 (Icon is displayed) -
3 (Icon is displayed) |
|
| Item | Available Setting | |
|---|---|---|
| RCTA | The RCTA function can be set to on/off: -
ON -
OFF |
|
| Volume | The volume of the warning buzzer can be selected: -
1 (Icon is displayed) -
2 (Icon is displayed) -
3 (Icon is displayed) |
|
| Item | Available Setting |
|---|---|
| PKSB | The parking support brake system can be set to on/off: -
ON -
OFF |
| Item | Available Setting | |
|---|---|---|
| RSA | The road sign assist system can be set to on/off: -
ON -
OFF |
|
| Notification Method* | Notification method can be selected: -
Above Speed Limit: (1)
No Notification (2)
Only visual (3)
Visual & Audio -
Overtaking: (1)
No Notification (2)
Only visual (3)
Visual & Audio -
Others: (1)
No Notification (2)
Only visual (3)
Visual & Audio |
|
| Notification Level* | Excess speed notification level can be selected: -
10 km/h (5 mph) -
5 km/h (3 mph) -
2 km/h (1 mph) Excess speed notification level can be selected: -
5 km/h -
3 km/h -
1 km/h |
|
*: Available setting differ by destination.
| Item | Available Setting |
|---|---|
| Dynamic Radar Cruise Control with Road Sign Assist | The dynamic radar cruise control with road sign assist can be set to on/off: -
ON -
OFF |
| Item | Available Setting | |
|---|---|---|
|
*1: Models with power back door system *2: Models with touchless kick actuation function *3: Models with stop and start system *4: Models with tire pressure warning system |
||
| PBD*1 | System Settings | The power back door system can be set to on/off: -
ON -
OFF |
| Kick Sensor*2 | The touchless kick actuation function can be set to on/off: -
ON -
OFF |
|
| Opening Adjustment | The opening angle can be selected: -
User Settings (Icon is displayed) -
5 (Icon is displayed) -
4 (Icon is displayed) -
3 (Icon is displayed) -
2 (Icon is displayed) -
1 (Icon is displayed) |
|
| Volume | The operation buzzer volume can be selected: -
3 (Icon is displayed) -
2 (Icon is displayed) -
1 (Icon is displayed) |
|
| Stop and Start*3 | The idling stop time of stop and start system can be selected: -
Standard -
Extended |
|
| TPWS*4 | Set Pressure | The tire pressure warning system can be initialized. |
| Change Wheel | The tire pressure warning system ID can be selected. | |
| Item | Available Setting | |
|---|---|---|
|
*1: Models with 7-inch color display type combination meter assembly *2: Gasoline models *3: HV models *4: Models with multimedia system or navigation system *5: 4WD/AWD models *6: Models with navigation system *7: Models with voice recognition system *8: Models with stop and start system |
||
| Language | The language used on the multi-information display can be selected: -
Arabic -
Czech -
Danish -
German -
Greek -
English -
Spanish -
Flemish -
French -
Italian -
Romanian -
Hungarian -
Dutch -
Norwegian -
Polish -
Portuguese -
Portuguese in Brazil -
Russian -
Slovak -
Finnish -
Swedish -
Turkish -
Ukrainian -
Hebrew -
Malay -
Indonesian -
Korean -
Vietnamese
|
|
| Units | The unit displayed on the multi-information display can be selected: -
km (km/L) -
km (L/100 km) -
miles (MPG)
|
|
| Meter Type*1 | The meter type on the multi-information display can be selected: -
Analog (Icon is displayed) -
Digital (Icon is displayed) |
|
| Eco Indicator*2 | The eco indicator can be set to on/off: -
ON -
OFF |
|
| EV indicator*3 | The EV indicator can be set to on/off: -
ON -
OFF |
|
| Fuel Economy Tab | Hybrid System*3 | The eco guidance can be set to on/off: -
ON -
OFF |
| Fuel Economy | The fuel economy type can be selected: -
Trip Average -
Total Average -
Tank Average |
|
| Audio Information Tab*4 | The audio information tab can be set to on/off: -
ON -
OFF |
|
| Vehicle Information Tab | Display Contents | The following displays can be switched to on/off: -
Energy Monitor*3 -
4WD/AWD Display*5 |
| Drive Info Type | The drive information type can be selected: -
Trip -
Total |
|
| Drive Info Items | The upper and lower of drive information items can be selected: -
Average Vehicle Speed -
Distance Travelled -
Elapsed Time |
|
| Pop-Up Display | The following displays that appear as soon as the set conditions are met can be switched to on/off: -
Turn-by-turn Navigation*6 -
Telephone*4 -
Audio Operation*4 -
Volume Operation*4 -
Voice Control*7 -
Duration*8 -
Status*8 |
|
| Multi-information Display OFF | Multi-information display is turned off. | |
| Default Settings | The set items can be initialized. | |
Interruption Display
When a warning is necessary, the warning message interrupts the current display on the multi-information display.
A warning message is displayed via an interrupt display when a vehicle malfunction occurs to warn the driver. Also, an advice message is displayed via an interrupt display depending on the situation, such as when the driver must proceed with caution.
The buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.
The intersection guidance*1, telephone display*2, audio operation and volume operation displays*2 are linked with the multimedia system or navigation system and displayed via an interrupt display.
*1: Models with navigation system
*2: Models with multimedia system or navigation system
The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU.
| Message | Buzzer |
|---|---|
|
*1: This message is displayed together with one of the listed messages. *2: Models for G.C.C. countries |
|
| CDY-2 | - |
| Cdy-2E | - |
| RES-1 | - |
| RES-2 | - |
| RESOLVER-1 NOT ADJUSTED | - |
| RESOLVER-2 NOT ADJUSTED | - |
| RESOLVER-R NOT ADJUSTED | - |
| Shift to P Before Exiting Vehicle | Sounds |
| Hybrid System Malfunction Do Not Tow This Vehicle | Sounds |
| Shift is in N Release Accelerator Before Shifting*A
Shift Out of N Release Accelerator Before Shifting*A |
Sounds |
| Press Brake when Vehicle is Stopped Hybrid System may Overheat | Sounds |
| Traction Battery Needs to be Protected Shift into P to Restart | Sounds |
| Hybrid System Malfunction*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Check Engine*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Hybrid Battery System Malfunction*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Accelerator System Malfunction*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Hybrid System Stopped*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Engine Stopped*1
·
Visit Your Dealer ·
Output Power Greatly Reduced Visit Your Dealer ·
Output Power Reduced Visit Your Dealer ·
Stop in a Safe Place See Owner's Manual ·
Stop in a Safe Place within 0.3 miles*A ·
Stop in a Safe Place within 0.5 km (0.3 miles)*A ·
Stop in a Safe Place within 0.6 miles*A ·
Stop in a Safe Place within 1.0 km (0.6 miles)*A ·
Stop in a Safe Place within 0.9 miles*A ·
Stop in a Safe Place within 1.5 km (0.9 miles)*A ·
Stop in a Safe Place within 1.2 miles*A ·
Stop in a Safe Place within 2.0 km (1.2 miles)*A ·
Stop in a Safe Place within 3.1 miles*A ·
Stop in a Safe Place within 5.0 km (3.1 miles)*A ·
Stop in a Safe Place within 6.2 miles*A ·
Stop in a Safe Place within 10 km (6.2 miles)*A ·
Output Power Reduced Avoid Shifting to N ·
Avoid Shifting to N Visit Your Dealer ·
Hybrid System Stopped Stop in a Safe Place ·
Shift to P See Owner's Manual |
Sounds |
| Traction Battery Needs to be Protected Refrain from the Use of N Position | Sounds |
| Release Accelerator
(and image display) |
Sounds |
| Speed Limit Exceeded*2 | Sounds |
| Charging System Malfunction Stop in a Safe Place See Owner's Manual
(and image display) |
Sounds |
| Drive-Start Control Malfunction Visit Your Dealer
(and image display) |
Sounds |
| Brake Override Malfunction Visit Your Dealer
(and image display) |
Sounds |
| Hybrid System Overheated Output Power Reduced
(and image display)*A |
Sounds |
| Accelerator and Brake Pedals Pressed Simultaneously
(and image display) |
- |
| Maintenance Required for Traction Battery Cooling Parts See Owner's Manual*A
Hybrid Battery Cooling Warning Visit Your Dealer*A |
- |
| Maintenance Required for Traction Battery Cooling Parts See Owner's Manual*A
Hybrid Battery Cooling Warning Visit Your Dealer*A |
Sounds |
| Low Auxiliary Battery See Owner's Manual | - |
| EV Mode Unavailable | Sounds |
| EV Mode Unavailable System Warming Up | Sounds |
| EV Mode Unavailable Hybrid Battery Low | Sounds |
| EV Mode Unavailable Speed Range Exceeded | Sounds |
| EV Mode Unavailable Reduce Acceleration to Activate | Sounds |
| EV Mode Deactivated | Sounds |
| EV Mode Deactivated Hybrid Battery Low | Sounds |
| EV Mode Deactivated Speed Range Exceeded | Sounds |
| EV Mode Deactivated Accelerator Pressed Too Far*A
EV Mode Deactivated Reduce Acceleration to Activate*A |
Sounds |
| Accelerator Pedal is Pressed | - |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the ECM and engine oil level sensor.
| Message | Buzzer |
|---|---|
|
*: Models with canister pump module |
|
| Please Wait Fuel Door Opening* | - |
| Ready to Refuel* | - |
| Close Fuel Lid* | - |
| Check Engine Visit Your Dealer | Sounds |
| Check Engine Reduced Engine Power Visit Your Dealer | Sounds |
| Reduced Engine Power Visit Your Dealer | Sounds |
| Engine Maintenance Required Visit Your Dealer | Sounds |
| Engine Coolant Temp High Stop in a Safe Place See Owner's Manual
(and image display) |
Sounds |
| Oil Pressure Low Stop in a Safe Place See Owner's Manual
(and image display) |
Sounds |
| Engine Oil Level Low Add or Replace | - |
| Fuel Low | - |
The combination meter assembly displays the following messages based on signals received from the ECM and engine oil level sensor.
| Message | Buzzer |
|---|---|
|
*1: Models with automatic transaxle or CVT *2: Models with gasoline particulate filter *3: Models with canister pump module |
|
| Release Accelerator*1
(and image display) |
Sounds |
| Check Engine Visit Your Dealer | Sounds |
| Check Engine Reduced Engine Power Visit Your Dealer | Sounds |
| Reduced Engine Power Visit Your Dealer | Sounds |
| Engine Maintenance Required Visit Your Dealer | Sounds |
| Engine Coolant Temp High Stop in a Safe Place See Owner's Manual
(and image display) |
Sounds |
| Oil Pressure Low Stop in a Safe Place See Owner's Manual
(and image display) |
Sounds |
| Drive-Start Control Malfunction Visit Your Dealer*1
(and image display) |
Sounds |
| Brake Override Malfunction Visit Your Dealer
(and image display) |
Sounds |
| Engine Oil Level Low Add or Replace | - |
| Accelerator and Brake Pedals Pressed Simultaneously
(and image display) |
- |
| Fuel Low | - |
| Exhaust Filter Full See Owner's Manual*2 | - |
| Exhaust Filter Full Visit Your Dealer*2 | Sounds |
| Exhaust Filter Regeneration in Process*2 | - |
| Check Fuel Cap*3 | Sounds |
The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU*1 or ECM*2.
*1: HV Models
*2: Gasoline Models
| Message | Buzzer |
|---|---|
| Cruise Control Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU*1 or ECM*2.
*1: HV Models
*2: Gasoline Models
| Message | Buzzer |
|---|---|
| Speed Limiter Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU*1 or ECM*2.
*1: HV Models
*2: Gasoline Models
| Message | Buzzer |
|---|---|
|
*: Models with full-speed range following function |
|
| Dynamic radar cruise control proximity warning
(image display) |
Sounds |
| Radar Cruise Control Unavailable See Owner's Manual*A
Radar Cruise Control Temporarily Unavailable See Owner's Manual*A |
Sounds |
| Radar Cruise Control Unavailable | Sounds |
| Radar Cruise Control Unavailable Press Brake to Resume Driving* | - |
| Cruise Control Malfunction Visit Your Dealer | Sounds |
| Cruise Control Fault Press Brake to Deactivate Visit Your Dealer* | Sounds |
| Radar Cruise Active Please Pay Attention to Other Vehicles | - |
| Dynamic radar cruise control system status
(image display) |
- |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the forward recognition camera.
| Message | Buzzer |
|---|---|
| ADJUSTING FORWARD CAMERA | - |
| Lane departure alert
(image display) |
Sounds |
| LTA Hold Steering Wheel
(and image display) |
- |
| LTA Steering Assist Unavailable Hold Steering Wheel
(and image display) |
Sounds |
| LTA Hold Steering Wheel
(and image display) |
Sounds |
| LTA Malfunction Visit Your Dealer | Sounds |
| LTA Unavailable | Sounds |
| LTA Turned ON Steering Assist Active | - |
| LTA Turned ON Steering Assist Inactive | - |
| LTA Unavailable Below Approx. 50km/h | - |
| LTA Unavailable Below Approx. 32MPH | - |
| LTA Unavailable at Current Speed | - |
| Lane tracing assist system status
(image display) |
- |
| Would You Like to Take a Rest?
(and image display) |
Sounds |
The combination meter assembly displays the following messages based on signals received from the forward recognition camera.
| Message | Buzzer |
|---|---|
| ADJUSTING FORWARD CAMERA | - |
| Lane departure alert
(image display) |
Sounds |
| LDA Hold Steering Wheel
(and image display) |
- |
| LDA Hold Steering Wheel
(and image display) |
Sounds |
| LDA Steering Assist Unavailable Hold Steering Wheel
(and image display) |
- |
| Lane Departure Alert Malfunction Visit Your Dealer | Sounds |
| Lane Departure Alert Unavailable | Sounds |
| Lane Departure Alert Turned ON Steering Assist Active | - |
| Lane Departure Alert Turned ON Steering Assist Inactive | - |
| Lane Departure Alert Unavailable Below Approx. 50km/h | - |
| Lane Departure Alert Unavailable Below Approx. 32MPH | - |
| Lane Departure Alert Unavailable at Current Speed | - |
| Lane departure alert system status
(image display) |
- |
| Would You Like to Take a Rest?
(and image display) |
Sounds |
The combination meter assembly displays the following messages based on signals received from the forward recognition camera.
| Message | Buzzer |
|---|---|
| Front Camera Unavailable | - |
| Front Camera Unavailable See Owner's Manual*A
Front Camera Temporarily Unavailable See Owner's Manual*A |
- |
| RSA Malfunction Visit Your Dealer | Sounds |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the engine stop and start ECU.
| Message | Buzzer |
|---|---|
|
*: Models with manual transaxle |
|
| Shift to N and Press Clutch* | Sounds |
| Stop & Start System Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals received from the ECM.
| Message | Buzzer |
|---|---|
| High Transmission Fluid Temp See Owner's Manual | Sounds |
The combination meter assembly displays the following messages based on signals received from the transmission control ECU.
| Message | Buzzer |
|---|---|
| Transmission Oil Temp. High Stop in a Safe Place and See Owner's Manual | Sounds |
The combination meter assembly displays the following messages based on signals received from the ECM.
| Message | Buzzer |
|---|---|
| Press the Accelerator Pedal when Starting Off | - |
The combination meter assembly displays the following messages based on signals received from the 4WD ECU assembly.
| Message | Buzzer |
|---|---|
| AWD TEST MODE*A
4WD TEST MODE*A |
- |
| AWD System Malfunction 2WD Mode Engaged Visit Your Dealer*A
4WD System Malfunction 2WD Mode Engaged Visit Your Dealer*A |
Sounds |
| AWD System Overheated 2WD Mode Engaged*A
4WD System Overheated 2WD Mode Engaged*A |
Sounds |
| AWD System Overheated Switching to 2WD Mode*A
4WD System Overheated Switching to 2WD Mode*A |
Sounds |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the tire pressure warning ECU and receiver.
| Message | Buzzer |
|---|---|
| TPWS Malfunction Visit Your Dealer | - |
| Setting Tire Pressure Warning System*A
Setting TPWS*A |
- |
| Tire Pressure Recalibrating Please Wait until Complete*A
Registering Each TPWS Sensor*A |
- |
| Tire Pressure Low Check Tire
(and image display) |
- |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the skid control ECU.
| Message | Buzzer |
|---|---|
|
*1: HV Models *2: Models with pre-collision system |
|
| Braking Power Low Stop in a Safe Place See Owner's Manual | Sounds |
| Brake Hold Malfunction Press Brake to Deactivate Visit Your Dealer | Sounds |
| Brake Hold Warning Press Brake on Slope | Sounds |
| Antilock Brake System Malfunction Visit Your Dealer | Sounds |
| Braking Power Low Visit Your Dealer*1 | Sounds |
| Brake Hold Malfunction Visit Your Dealer | Sounds |
| Brake Hold Less Effective During Icy Conditions | Sounds |
| Brake Hold Active Press Brake and Switch to Deactivate | Sounds |
| Brake Hold Unavailable Driver Door Open | Sounds |
| Brake Hold Unavailable Driver Seat Belt Unbuckled | Sounds |
| Brake Hold Unavailable Hood or Trunk Open | Sounds |
| Press Brake to Maintain Brake Hold | Sounds |
| Close Driver Door to Maintain Brake Hold | Sounds |
| Fasten Driver Seat Belt to Maintain Brake Hold | Sounds |
| Brake Hold Unavailable | Sounds |
| Brake Hold Deactivated | Sounds |
| Brake Hold Deactivated Parking Brake Automatically Applied | Sounds |
| Traction Control Turned OFF | - |
| Secondary Collision Brake system Malfunction Visit Your Dealer*2 | Sounds |
The combination meter assembly displays the following messages based on signals received from the parking brake ECU assembly*1 or skid control ECU*2.
*1: HV Models
*2: Gasoline Models
| Message | Buzzer |
|---|---|
| EPB Shift Interlock Function Activated | Sounds |
| EPB Shift Interlock Function Deactivated | Sounds |
| EPB Automatically Applied | Sounds |
| Parking Brake Unavailable | Sounds |
| Parking Brake Temporarily Unavailable | Sounds |
| Parking Brake Unavailable Vehicle may Roll Park on Flat Road*A
Parking Brake Unavailable Vehicle may Roll Park the Vehicle in a Flat Place*A |
Sounds |
| Parking Brake Unable to Disengage Press Brake and Push Parking Brake Switch to Release | Sounds |
| Parking Brake Unable to Disengage Close Door and Fasten Seat Belt | Sounds |
| Parking Brake ON | Sounds |
| Release Parking Brake | Sounds |
| Parking Brake Malfunction Visit Your Dealer | Sounds |
| Vehicle may Roll Shift to P | Sounds |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the power steering ECU.
| Message | Buzzer |
|---|---|
|
*1: HV Models *2: Gasoline Models |
|
| Power Steering Malfunction Steering Power Low Visit Your Dealer | Sounds |
| Voltage Abnormality Steering Power Low Visit Your Dealer | Sounds |
| Steering Power Low Visit Your Dealer | Sounds |
| Power Steering Malfunction Visit Your Dealer | Sounds |
| Hybrid System Stopped Steering Power Low*1 | Sounds |
| Engine Stopped Steering Power Low*2 | Sounds |
The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly.
| Message | Buzzer |
|---|---|
|
*: Models with parking support brake system |
|
| Toyota parking assist-sensor system detection display
(image display) |
- |
| Toyota parking assist-sensor system temporary mute display* | - |
| Parking Assist Malfunction Visit Your Dealer | Sounds |
| Parking Assist Unavailable Clean Parking Assist Sensor*A
Parking Assist Unavailable Please Clean Parking Assist Sensor*A |
Sounds |
| Parking Assist Unavailable | Sounds |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly.
| Message | Buzzer |
|---|---|
| WRITE ZERO-POINT OF STEERING ANGLE | - |
| END OF ADJUSTMENT | - |
| MEMORY ERROR | - |
| Switch to Brake
(and image display) |
Sounds |
| Brake*A
Press Brake Pedal*A (and image display) |
Sounds |
| Brake! | Sounds |
| Object Detected Acceleration Reduced*A
Object Detected Ahead Speed Reduced*A |
Sounds |
| PKSB Malfunction Visit Your Dealer | Sounds |
| PKSB Unavailable | - |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor LH.
| Message | Buzzer |
|---|---|
|
*: Models with RCTA function |
|
| Rear Cross Traffic Alert Malfunction Visit Your Dealer*, *A
RCTA Malfunction Visit Your Dealer*, *A |
Sounds |
| Rear Cross Traffic Alert Unavailable*, *A
RCTA Unavailable*, *A |
Sounds |
| Blind Spot Monitor Unavailable | Sounds |
| Blind Spot Monitor Malfunction Visit Your Dealer | Sounds |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.
| Message | Buzzer |
|---|---|
| Push and Hold Power Switch for Emergency Stop | - |
| Shift to N and Push POWER Switch to Restart*A
Shift to N Position and Push POWER Switch to Restart*A |
- |
| Hybrid System Stopped Shift into P*A
Hybrid System Stopped Shift into P Position*A |
Sounds |
| Hybrid System Stopped Stop in a Safe Place | Sounds |
| Shift to P when Parked | Sounds |
| Auto Power OFF to Conserve Battery | - |
| Key Not Detected Check Key Location | Sounds |
| Smart Entry & Start System Malfunction See Owner's Manual | Sounds |
| Turn Power OFF | Sounds |
| Key Detected in Vehicle | - |
| Key Detected in Vehicle | Sounds |
| Press Brake Pedal and Touch Power Switch with Key*A
Smart Key Error Press Brake and Touch Key to Power Switch to Start*A |
Sounds |
| Not Ready to Drive Press Brake Pedal and Push Power Switch to Start*A
Not Ready to Drive Press Brake and Push Power Switch to Start*A (and image display)*A |
- |
| Press Brake Pedal and Push Power Switch to Start*A
Press Brake Pedal and Push POWER Switch to Start*A |
Sounds |
| Push Power Switch while Turning Steering Wheel in Either Direction*A
Push POWER Switch while Turning the Steering Wheel in Either Direction*A |
Sounds |
| Shift to P to Start*A
Shift to P Position to Start*A |
- |
| Key Battery Low Replace Key Battery | Sounds |
| A New Key has been Registered Contact Your Dealer for Details*A
New Key Registered Contact Your Dealer if You Did Not Register a New Key*A |
- |
| Press Brake Pedal and Push Power Switch to Start*A
Press Brake Pedal and Push POWER Switch to Start*A (and image display) |
- |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.
| Message | Buzzer |
|---|---|
|
*1: Models with manual transaxle *2: Models with automatic transaxle or CVT |
|
| Push and Hold Engine Switch for Emergency Stop | - |
| Shift to N and Push ENGINE Switch to Restart*A
Shift to N Position and Push ENGINE Switch to Restart*A |
- |
| Press Clutch Pedal and Push Engine Switch to Restart*1 | - |
| Engine Stopped Shift into P Position*2 | Sounds |
| Engine Stopped Stop in a Safe Place | Sounds |
| Shift to N and Turn Engine Switch to Restart*2, *A
Shift to N Position and Turn Engine Switch to Restart*2, *A |
Sounds |
| Press Clutch Pedal and Push Engine Switch to Restart*1 | Sounds |
| Shift to P when Parked*2 | Sounds |
| Auto Power OFF to Conserve Battery | - |
| Key Not Detected Check Key Location | Sounds |
| Smart Entry & Start System Malfunction See Owner's Manual | Sounds |
| Turn Power OFF | Sounds |
| Key Detected in Vehicle | - |
| Key Detected in Vehicle | Sounds |
| Press Brake Pedal and Touch Engine Switch with Key*2, *A
Smart Key Error Press Brake and Touch Key to Engine Switch to Start*2, *A |
Sounds |
| Press Clutch Pedal and Touch Engine Switch with Key*1 | Sounds |
| Not Ready to Drive Press Brake Pedal and Push Engine Switch to Start*2, *A
Not Ready to Drive Press Brake and Push Engine Switch to Start*2, *A (and image display)*A |
- |
| Not Ready to Drive*1
(and image display) |
- |
| Press Brake Pedal and Push Engine Switch to Start*2, *A
Press Brake Pedal and Push ENGINE Switch to Start*2, *A |
Sounds |
| Push Engine Switch while Turning Steering Wheel in Either Direction*A
Push ENGINE Switch while Turning the Steering Wheel in Either Direction*A |
Sounds |
| Key Battery Low Replace Key Battery | Sounds |
| A New Key has been Registered Contact Your Dealer for Details*A
New Key Registered Contact Your Dealer if You Did Not Register a New Key*A |
- |
| Press Brake Pedal and Push Engine Switch to Start*2, *A
Press Brake Pedal and Push ENGINE Switch to Start*2, *A (and image display) |
- |
| Press Clutch Pedal and Push Engine Switch to Start*1
(and image display) |
- |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the main body ECU.
| Message | Buzzer |
|---|---|
| Theft Sensor Turned OFF | - |
| Theft Sensor Turned ON | - |
The combination meter assembly displays the following messages based on signals received from the airbag ECU assembly.
| Message | Buzzer |
|---|---|
| SRS Airbag System Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals received from the forward recognition camera.
| Message | Buzzer |
|---|---|
| ERROR ADJUSTING FRONT RADAR BEAM | - |
| ADJUSTING FRONT RADAR BEAM VERTICAL | - |
| ADJUSTING FRONT RADAR BEAM HORIZONTAL | - |
| CHECKING PCS BRAKE | - |
| BRAKE! | Sounds |
| Front Camera Unavailable | - |
| Front Camera Unavailable See Owner's Manual*A
Front Camera Temporarily Unavailable See Owner's Manual*A |
- |
| Pre-Collision System Malfunction Visit Your Dealer | Sounds |
| VSC Turned OFF Pre-Collision Brake System Unavailable | - |
| Pre-Collision System Unavailable | - |
| Pre-Collision System Unavailable Clean Sensor | - |
| Pre-Collision System OFF | - |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the air conditioning amplifier assembly.
| Message | Buzzer |
|---|---|
| High Power Consumption Partial Limit on AC/Heater Operation | - |
The combination meter assembly displays the following messages based on signals received from the air conditioning amplifier assembly.
| Message | Buzzer |
|---|---|
| Cannot Use Front Windscreen De-icer Outside Temperature is over 5 Degrees Celsius Use Defroster | - |
The combination meter assembly displays the following messages based on signals received from the main body ECU.
| Message | Buzzer |
|---|---|
|
*: Models with sliding roof system or panoramic moon roof system |
|
| Window Open | - |
| Window / Moon Roof Open* | - |
The combination meter assembly displays the following messages based on signals received from the main body ECU.
| Message | Buzzer |
|---|---|
| Moon Roof Open | - |
| Window / Moon Roof Open | - |
The combination meter assembly displays the following messages based on signals received from the main body ECU.
| Message | Buzzer |
|---|---|
| Moon Roof Open | - |
| Window / Moon Roof Open | - |
The combination meter assembly displays the following messages based on signals received from the main body ECU.
| Message | Buzzer |
|---|---|
|
*: If the vehicle has reached a speed of 5 km/h (3 mph). |
|
| Driver door open
(image display) |
- |
| Front passenger door open
(image display) |
|
| Rear passenger door LH open
(image display) |
|
| Rear passenger door RH open
(image display) |
|
| Hood open
(image display) |
|
| Back door open
(image display) |
|
| Driver door open while driving*
(image display) |
Sounds |
| Front passenger door open while driving*
(image display) |
|
| Rear passenger door LH open while driving*
(image display) |
|
| Rear passenger door RH open while driving*
(image display) |
|
| Hood open while driving*
(image display) |
|
| Back door open while driving*
(image display) |
|
The combination meter assembly displays the following messages based on signals received from the level warning switch assembly.
| Message | Buzzer |
|---|---|
| Windshield Washer Fluid Low | - |
The combination meter assembly displays the following messages based on signals received from the headlight ECU sub-assembly RH and headlight ECU sub-assembly LH or main body ECU.
| Message | Buzzer |
|---|---|
|
*: Models with automatic high beam system |
|
| Headlight System Uninitialized Visit Your Dealer | - |
| Front Camera Unavailable* | - |
| Front Camera Unavailable See Owner's Manual*, *A
Front Camera Temporarily Unavailable See Owner's Manual*, *A |
- |
| Turn Lights OFF | Sounds |
| Headlight System Malfunction Visit Your Dealer | Sounds |
| To Activate Automatic High Beam, Switch Headlights to High Beam* | - |
*A: Displayed message may vary depending on specifications.
The combination meter assembly displays the following messages based on signals received from the vehicle approaching speaker controller.
| Message | Buzzer |
|---|---|
| Proximity Notification System Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals received from the swing grille actuator assembly.
| Message | Buzzer |
|---|---|
| Grille Shutter Not Initialized Cancel Maintenance Mode | - |
| Grille Shutter Malfunction Visit Your Dealer | Sounds |
The combination meter assembly displays the following messages based on signals.
| Message | Buzzer |
|---|---|
|
*1: Models without entry and start system *2: Models for G.C.C. countries |
|
| Not Ready to Drive*1 | - |
| Engine Stopped Press Brake Firmly to Restart | - |
| Speed Limit Exceeded*2 | Sounds |
| Roads may be Icy Drive with Care
(and image display) |
Sounds |
The reminder service/operation advisory function displays the following setting change reminders and operation support displays via an interrupt display when conditions are met according to the vehicle condition and various switch operations.
| Reminder Details | Display Condition | Multi-information Display | Choice |
|---|---|---|---|
|
*1: HV models *2: Gasoline models *3: Except destination package for Korea |
|||
| Headlight illumination reminder | When system determines vehicle is being driven at night with headlights turned off | Turn ON Headlamps | - |
| Turn headlights off after stopping reminder (when light control switch is set to HEAD) | When headlights are illuminated after power switch*1 or ignition switch*2 is turned off (light control switch is in HEAD position) | Headlamps Are ON | - |
| Turn headlights off after stopping reminder (when light control switch is set to AUTO) | When headlights are illuminated after power switch*1 or ignition switch*2 is turned off (light control switch is in AUTO position) | Headlamps Are ON
Turn Headlamps OFF? |
·
Yes ·
No |
| Close door windows during wiper operation reminder*3 | If any door window is open when attempting to operate wipers | Close Open Windows? | ·
Yes ·
No |
Buzzer
The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.
|
*1: HV models *2: Models for G.C.C countries *3: Models with Toyota Safety Sense *4: Gasoline models *5: Models with entry and start system *6: Models without entry and start system *7: Models with lane departure alert system *8: Models with lane tracing assist system *9: Models with rear seat belt warning function *10: Except models for G.C.C countries *11: Models with road sign assist system *12: Except models with manual transaxle *13: Models with stop and start system *14: Models with speed limiter system *15: Except models with manual transaxle *16: Models with gasoline particulate filter |
|
| Priority | Item |
| 1 | READY*1 |
| 2 | Driver Seat Belt Warning*2 |
| 3 | Pre-collision System Warning*3 |
| 4 | Hybrid System Start while Driving Notice Buzzer*1 |
| 5 | Push Switch*1/Engine Switch*4 Operation while Driving Warning*5 |
| 6 | Key Reminder*6 |
| 7 | Vehicle Proximity Warning*3 |
| 8 | Pedestrian Warning/Vehicle Distance Time Alert*3 |
| 9 | Lane Departure Alert System*7/ Lane Tracing Assist System*8 Cancel Warning |
| 10 | Lane Departure Alert System*7/ Lane Tracing Assist System*8 Warning |
| 11 | Hands off Steering Wheel Warning*3 |
| 12 | Unexpected Vehicle Motion Warning (Level 1) |
| 13 | Unexpected Vehicle Motion Warning (Level 2) |
| 14 | Brake Force Reduction Warning*1 |
| 15 | Brake Fluid Low Warning*4 |
| 16 | Engine Oil Pressure Warning |
| 17 | Driver Seat Belt Warning (Once)*2 |
| 18 | Front Passenger Seat Belt Warning (Once)*2 |
| 19 | Seat Belt Warning (Level 2) |
| 20 | Seat Belt Warning (Level 1)*2 |
| 21 | Rear Seat Belt Warning*9 |
| 22 | Seat Belt Warning (Level 1)*10 |
| 23 | EPS Warning (Once) |
| 24 | EPS Warning (Intermittent) |
| 25 | Accelerator Depression in N Position*1 |
| 26 | Hybrid System Warning (Intermittent)*1 |
| 27 | Hybrid System Warning (Continuous)*1 |
| 28 | Hybrid System Warning (Once)*1 |
| 29 | Towing Prohibition Notification*1 |
| 30 | Road Sign Assist Indication*11 |
| 31 | Engine Coolant Temperature Warning |
| 32 | Door Open when Shift Position not P Warning*12 |
| 33 | Stop and Start System Warning*13 |
| 34 | Entry and Start System Warning (Intermittent 1)*5 |
| 35 | Brake System Temperature Notification / Active Test*1 |
| 36 | Brake System Temperature Warning*1 |
| 37 | Brake Pedal Operation Request*3 |
| 38 | Entry and Start System Warning (Intermittent 2) (Maximum 9 Times)*5 |
| 39 | Entry and Start System Warning (Once)*5 |
| 40 | Multi-information Display Warning |
| 41 | Accelerator Hold Warning*1 |
| 42 | Hybrid Battery Low Warning (Continuous)*1 |
| 43 | Hybrid Battery Low Warning (Intermittent)*1 |
| 44 | Hybrid Unit Overheat Warning*1 |
| 45 | Electric Parking Brake System Cancel Warning |
| 46 | Brake Hold System Control Not Release Warning |
| 47 | Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*3 |
| 48 | Low Speed Zone Leading Vehicle Lost Warning*3 |
| 49 | Immobiliser Certification Reminder |
| 50 | Speed Limit Warning*2 |
| 51 | Speed Limiter*14 |
| 52 | Parking Brake Engaged Warning |
| 53 | Door Open while Driving Warning |
| 54 | Vehicle Sway Warning*3 |
| 55 | Shift Reject Warning*15 |
| 56 | GPF Warning*16 |
| 57 | Traction Battery Cooling Performance Down Notification*1 |
| 58 | EV Drive Mode Reject Warning*1 |
| 59 | Light Reminder |
| 60 | Pre-collision Brake Assist Notification Buzzer*3 |
| 61 | Pre-collision Warning Buzzer*3 |
| 62 | Brake Inspections Standby Mode Notification Buzzer*3 |
| 63 | Radar Axis Adjustment Complete Notification Buzzer*3 |
| 64 | Camera Axis Adjustment Complete Notification Buzzer*3 |
| 65 | Pre-collision Braking Notification Buzzer*3
Return from Brake Inspection Mode Notification Buzzer*3 Radar Axis Adjustment Incomplete Notification Buzzer*3 Camera Axis Adjustment Start Notification Buzzer*3 |
| 66 | Turn Signal/Hazard Warning Operation |
Rear Seat Belt Warning (Models with Rear Seat Belt Warning Function)
The rear seat belt warning function indicates the state of the rear seat belts.
The combination meter assembly receives a rear seat belt warning signal based on the rear seat belt buckle switches and courtesy switches for the rear doors, occupant detection sensor (for rear seat)*. When the signal is received, combination meter assembly operates the lights. If a warning is necessary, the buzzer in the combination meter assembly will also sound.
*: Models with rear seat occupant detection sensor
The flow of operations that results in a rear seat belt warning is as follows:
| Step | Condition Transition | Rear Seat Belt Warning Indicator | Buzzer |
|---|---|---|---|
|
*1: HV models *2: Gasoline models *3: Models without rear seat occupant detection sensor *4: Sound cycle is 1.2 seconds. *5: Sound cycle is 0.4 seconds. *6: Except models for Europe or Australia *7: Models for Europe or Australia *8: Except models with manual transaxle *9: Models with rear seat occupant detection sensor |
|||
| (a) | The power switch*1 or ignition switch*2 is turned off. | Rear seat belt warning indicator is not illuminated. | No Sound |
| (b)*3 | A rear door is opened then closed. | The warning will be displayed for 60 seconds and then go off. | |
| (c)*3 | ·
Power switch is turned on (IG).*1 ·
Ignition switch is turned to ON.*2 ·
A seat belt is fastened. |
·
In this case, all seats will be displayed as being unfastened regardless of the number of occupants. If seat belts are then fastened, the display for the relevant seat will go off. ·
The warning will be displayed for approximately 60 seconds and then go off. |
|
| (d) | Any of the rear seat belts are unfastened. | Seats with an unfastened seat belt will be illuminated or blinked regardless of the number of occupants. | If the vehicle speed exceeds 20 km/h (approximately 12 mph):
1.
Sounds once*4 2.
Sounds for an additional 6 seconds*4, *6 Sounds for an additional 24 seconds*4, *7 3.
Sounds for an additional 60 seconds*5, *6 Sounds for an additional 100 seconds*5, *7 |
| (e) | When one of the following conditions is met, the buzzer will stop sounding.
- The seat belt is refastened. - The vehicle speed decreases to less than approximately 2 km/h (approximately 1.2 mph) and either the parking brake is applied or the shift position is P*8. |
·
Seats with an unfastened seat belt will be blinked regardless of the number of occupants. ·
The warning will be blinked and then go off.*3 ·
The warning will be blinked and then illuminated.*9 |
Stops sounding |