Home › Drivetrain › P710 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM3620E _52 Drivetrain _076475 P710 HYBRID TRANSMISSION / TRANSAXLE _0374578 HYBRID TRANSAXLE SYSTEM GE GENERAL F

P710 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A P710 hybrid vehicle transaxle is used.


b.

Containing the motor (MG2) for driving the vehicle and generator (MG1) for generating electrical power, this transaxle uses a continuously variable transmission mechanism with a compound gear unit that achieves smooth and quiet operation.


c.

This hybrid vehicle transaxle assembly consists primarily of a generator (MG1), motor (MG2), power split planetary gear unit, counter gear, final gear, differential gear unit and oil pump.


d.

By utilizing a pluriaxial configuration for the generator (MG1) and the motor (MG2), the overall length of the transaxle has been shortened. A compound gear that consists of the ring gear of the power split planetary gear, counter drive gear and parking lock gear is utilized to drastically reduce size and weight. By using high accuracy machining for the gear tooth surfaces, low-loss bearings and an oil sling type lubrication mechanism, driving losses have been reduced, resulting in improved fuel economy and reduced noise.


e.

This transaxle has a 4-shaft configuration. The power split planetary gear unit, an oil pump and generator (MG1) are provided on the main shaft. The MG2 reduction gear and motor (MG2) are provided on the 2nd shaft. The counter driven gear and the final drive gear are provided on the 3rd shaft. The final driven gear and the differential gear unit are provided on the 4th shaft.


f.

A differential pre-torque mechanism is used. Straightline stability and acceleration performance during periods of low load and low differential rotation when the vehicle is being driven normally are ensured.


g.

Lubrication for each gear is performed via the trochoid oil pump of the main shaft and final driven gear slinging up ATF. Through the use of a lubrication structure (oil sling type lubrication method) in which the gears sling up ATF, reduction of oil pump drive loss and enhanced transmission efficiency of the powertrain system have been achieved. Also, a water-cooled type oil cooler which optimizes the flow of ATF is used to achieve high cooling performance, resulting in a high efficiency and high output powertrain.

X142046C01
3.292,5.5 3.625,5.5 3.625,5.5 4.125,5.292 true 4.615,1.188 5.75,1.01 5.75,1.01 6,1.01 true 1.667,0.333 2.167,0.333 2.167,0.333 3.333,1 true 1.5,1.167 1.833,1.167 1.833,1.167 2.802,1.51 true 1.583,2.167 1.833,2.167 1.833,2.167 3.25,2.583 true 4.615,4.885 5.333,5.5 5.333,5.5 5.917,5.5 true 4.49,3.385 5.667,4.167 5.667,4.167 6,4.167 true 4.25,2.833 5.583,3.417 5.583,3.417 6,3.417 true 4.333,1.948 6,2.167 true 4.354,1.302 5.583,1.75 5.583,1.75 6,1.75 true 4.563,1.104 5.583,0.667 5.583,0.667 5.917,0.667 true 4.115,1.146 5.417,0.25 5.417,0.25 5.667,0.25 true 4.531,2.135 5.583,2.75 5.583,2.75 6,2.75 true 1.5,0.271 1.698,0.417 0.198,0.146 10 false *1 1.344,1.083 1.542,1.26 0.198,0.177 10 false *2 1.417,2.083 1.625,2.25 0.208,0.167 10 false *3 3.125,5.417 3.302,5.573 0.177,0.156 10 false *4 6.031,4.083 6.344,4.24 0.313,0.156 10 false *5 6.01,3.333 6.323,3.49 0.313,0.156 10 false *6 6.042,2.646 6.354,2.802 0.313,0.156 10 false *7 6.021,2.083 6.333,2.24 0.313,0.156 10 false *8 6.01,1.646 6.323,1.802 0.313,0.156 10 false *9 5.948,0.594 6.417,0.75 0.469,0.156 10 false *10 5.677,0.156 6.146,0.313 0.469,0.156 10 false *11 1.813,1.552 2,1.74 0.188,0.188 10 false *a 1.802,2.531 2.021,2.708 0.219,0.177 10 false *b 1.99,3.156 2.188,3.313 0.198,0.156 10 false *c 3.073,4.479 3.26,4.635 0.188,0.156 10 false *d 5.958,5.427 6.271,5.583 0.313,0.156 10 false *e 6.031,0.948 6.344,1.104 0.313,0.156 10 false *f
*1 Generator (MG1) *2 Oil Pump
*3 Motor (MG2) *4 Final Driven Gear
*5 MG2 Reduction Gear *6 Final Drive Gear
*7 Counter Driven Gear *8 Planetary Ring Gear
*9 Power Split Planetary Gear Unit *10 Counter Drive Gear
*11 Parking Lock Gear - -
*a Main Shaft *b 3rd Shaft
*c 2nd Shaft *d 4th Shaft
*e Differential Gear Unit *f Compound Gear




SPECIFICATION


Hybrid Vehicle Transaxle

*1: Weight shows the figure with the fluid fully filled.

*2: The ratio of the combination of the counter and final gears.

Transaxle Type P710
Shift Position P / R / N / D / S
Fluid Type Toyota Genuine ATF WS
Fluid Capacity 3.9 Liters (4.1 US qts, 3.4 Imp.qts)
Weight (Reference)*1 95.9 kg (211.4 lb)
Power Split Planetary Gear Unit No. of Sun Gear Teeth 30
No. of Pinion Gear Teeth 23
No. of Ring Gear Teeth 78
MG2 Reduction Gear No. of Drive Gear Teeth 16
No. of Driven Gear Teeth 49
Counter Gear No. of Drive Gear Teeth 53
No. of Driven Gear Teeth 49
Final Gear No. of Drive Gear Teeth 20
No. of Driven Gear Teeth 78
Total Speed Reduction Ratio*2 3.605