Home › Drivetrain › UB80E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM3620E _52 Drivetrain _076473 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0375426 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  CENTRIFUGAL FLUID PRESSURE CANCELING MECHANISM  


CONSTRUCTION


a.

For the following reason, a centrifugal fluid pressure canceling mechanism is used on the C1, C2, C3 and C4 clutches.


b.

Clutch shifting operations are affected not only by the valve body controlling fluid pressure but also by centrifugal fluid pressure from the fluid that is present in the clutch piston oil pressure chamber (chamber A). The centrifugal fluid pressure canceling mechanism uses chamber B to reduce the effects of the centrifugal fluid pressure due to the fluid in chamber A. As a result, smooth shifting with excellent response is achieved.

X136634C01
0.958,2.156 1.042,2.156 1.042,2.156 1.469,2.438 true 0.917,0.948 1,0.948 1,0.948 1.948,1.635 true 0.75,0.854 1.063,1.01 0.313,0.156 10 false *1 0.781,2.063 1.094,2.219 0.313,0.156 10 false *2
*1 C2 Clutch *2 Piston
V100143

Chamber A
V100145

Chamber B



c.

Chamber B is filled by fluid supplied to the shaft for lubrication. As a result of filling chamber B, there is the same amount of fluid pressure due to centrifugal force on both sides of the piston. This cancels the effect of fluid pressure on the piston due to centrifugal force. Accordingly, it is not necessary to discharge the fluid through the use of a check ball, and highly responsive and smooth shifting characteristics are achieved. By utilizing lubrication fluid such as that of the shaft, an equal centrifugal force is applied, canceling the centrifugal force that is applied to the piston itself. Accordingly, it is not necessary to discharge the fluid through the use of a check ball, and a highly responsive and smooth shifting characteristic has been achieved.

X100592E19
3.823,0.302 3.99,0.302 3.99,0.302 3.99,0.635 false 3.74,1.51 3.563,1.51 3.563,1.51 3.563,1.177 false 2.719,0.177 3.01,0.177 3.01,0.177 3.01,1.24 true 1.115,1.25 1.573,1.25 true 2.49,2.219 2.49,2.375 2.49,2.375 1.99,2.375 false 1.99,2.375 1.99,2.219 false 1.74,2.656 2.24,2.656 2.24,2.656 2.24,2.375 false 4.813,3.5 6.604,4.24 1.792,0.74 10 false Target fluid pressure (original clutch pressure) 2.542,3.49 4.063,4.26 1.521,0.771 10 false Centrifugal fluid pressure applied to chamber B 5.063,1.76 6.74,2.427 1.677,0.667 10 false : Centrifugal Fluid Pressure Applied to Chamber B 5.073,1.104 6.74,1.813 1.667,0.708 10 false : Centrifugal Fluid Pressure Applied to Chamber A 5.073,0.469 6.958,0.865 1.885,0.396 10 false : Target Fluid Pressure 3.385,0.219 4.271,0.625 0.885,0.406 10 false Clutch 3.792,1.438 4.677,1.844 0.885,0.406 10 false Piston 0.917,0.094 2.708,0.75 1.792,0.656 10 false Chamber B (Centrifugal Fluid Pressure Chamber) 0.271,1.177 1.083,2.01 0.813,0.833 10 false Chamber A (Piston Fluid Pressure Chamber) 0.302,2.573 1.719,3.156 1.417,0.583 10 false Fluid Pressure Applied to Piston 2.844,2.719 3.865,3.125 1.021,0.406 10 false Shaft Side 0.604,3.531 2,4.26 1.396,0.729 10 false Fluid pressure applied to piston