OUTLINE
A power door lock control system, which uses a door lock motor to lock and unlock the doors, is used.
This system is controlled by the main body ECU.
The main body ECU outputs signals to the respective door lock motors.
A 1-motion open operation, which simultaneously unlocks and opens the door when the inside handle is pulled, is provided for the driver door and passenger door depending on the model for when the doors are opened from inside the vehicle.
The customization function of the Global TechStream (GTS) or radio and display receiver assembly* makes it possible to adjust and change the settings for each function.
*: Models with multimedia system or navigation system
PRECAUTION
Ignition Switch Expressions (Gasoline Models)
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch
(Position) |
Engine Switch
(Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |