FUNCTION
The power door lock control system has the following functions:
| Function*1 | Outline |
|---|---|
| Manual Unlock | This function unlocks all the doors when the door control switch is operated to the unlock side. |
| Manual Lock | This function locks all the doors when the door control switch is operated to the lock side. |
| Key-linked Unlock*2 | This function, which is linked with the door lock key cylinder, can unlock all the doors when an unlock operation is performed. |
| Key-linked 2-step Unlock*2 | This function is provided to unlock the driver door when the mechanical key is turned in the door lock key cylinder the first time and to unlock the remaining doors when it is turned the second time within 5 seconds of the first time. |
| Key-linked Lock | This function, which is linked with the door lock key cylinder, can lock all the doors when a lock operation is performed. |
| Collision Door Lock Release*3 | If the SRS airbag system has been activated, and the main body ECU has detected the activation signal output by the airbag ECU, the main body ECU unlocks all the doors. |
| Manual Unlock Prohibition | When the doors are all closed and are locked using a key-linked lock operation, wireless door lock operation or entry lock operation*4, unlocking the vehicle using the door control switch is prohibited. |
| Driver Door Opening-linked Automatic Door Unlock | All the doors are automatically unlocked when the driver door is opened within 45 seconds of the power switch being turned from on (IG) to on (ACC) or off.*5 |
| All the doors are automatically unlocked when the driver door is opened within 45 seconds of the ignition switch being turned from ON to ACC or off.*6 | |
| Shift-linked Automatic Door Unlock*7 | When the power switch is on (IG) and the shift lever is moved to P position from a position other than P, all of the doors will be automatically unlocked.*5 |
| When the ignition switch is ON and the shift lever is moved to P position from a position other than P, all of the doors will be automatically unlocked.*6 | |
| Shift-linked Automatic Door Lock*7 | When the conditions listed below are met, this function causes all the doors to be automatically locked:
·
The power switch is changed from on (ACC) or off to on (IG).*5 ·
The ignition switch is changed from ACC or off to ON.*6 ·
All the doors are closed. ·
The shift lever is moved out of the P position. ·
Any of the doors are in an unlocked state. |
| Speed Sensitive Automatic Door Lock | When the conditions listed below are met, this function causes all the doors to be automatically locked:
·
Vehicle speed is higher than approximately 20 km/h (12 mph). ·
All the doors are closed. ·
Any of the doors is unlocked. |
| Key Confinement Prevention | ·
When the key is inserted in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*8 ·
When the electrical key is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*9 |
| Double Locking*10 | ·
The double locking function also prevents the doors from being opened through the operation of the inside door knobs. As a result, the doors cannot be opened from either inside or outside of the vehicle. ·
Pressing the lock button on the door control transmitter assembly*8 or electrical key*9 once and then pressing it again within 5 seconds activates the double locking function. However, as an emergency unlocking maneuver, only the driver door can be unlocked with a mechanical key.
|
| Customization | The on or off setting of some functions and settings can be performed using the Global TechStream (GTS) or radio and display receiver assembly*13. In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual. |
*1: The default setting differs depending on the model.
*2: The function can be set to unlock all the doors after 1 or 2 key-linked unlock operations for the driver side by using the customization function.
*3: Except destination package for Korea
*4: Models with entry function
*5: HV models
*6: Gasoline models
*7: Except models with manual transaxle
*8: Models without entry and start system
*9: Models with entry and start system
*10: Models with double locking function
*11: Models with theft deterrent system
*12: When the customization setting of "Security control with mechanism key" is off.
*13: Models with multimedia system or navigation system
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.