FUNCTION
The wireless door lock control system has the following functions:
| Function*1 | Outline |
|---|---|
| All Doors Lock | Pressing the lock button of the door control transmitter assembly*2 or electrical key*3 locks all doors and the back door. |
| All Doors Unlock (1-step Unlock)*4 | Pressing the unlock button of the door control transmitter assembly*2 or electrical key*3 unlocks all doors and the back door. |
| All Doors Unlock (2-step Unlock)*4 | Pressing the unlock button on the door control transmitter assembly*2 or electrical key*3 once unlocks the driver door, and pressing it again within 5 seconds unlocks all the doors. |
| Power Back Door Open or Close*5 | Pressing and holding the power back door button for approximately 0.8 second opens and closes the back door. |
| Power Back Door Reserve Lock*5 | When a door other than the back door is closed and the door lock is operated by electrical key during closing operation of the back door, a door lock operation is performed at that time. The door lock operation completes when the closing operation of the back door ends. |
| Answer Back | ·
When the doors are being locked or unlocked using the door control transmitter assembly*2 or electrical key*3, the wireless door lock buzzer sounds*6 and the hazard warning lights blink once while locking and twice while unlocking. ·
When the power back door is opened and closed by using the electrical key, the wireless door lock buzzer sounds and the hazard warning lights blink*7 twice as an answer back.*5 |
| Panic Alarm*8 | Pressing and holding the panic button of the electrical key for more than approximately 0.8 seconds causes the following to activate as an alarm:
·
Sounds the vehicle horn. ·
Flashes the hazard warning lights. |
| Door Ajar Warning | If any door is open or ajar, pressing the lock button of the door control transmitter assembly*2 or electrical key*3 will cause the wireless door lock buzzer to sound for about 5 seconds. |
| Wireless Door Lock when Doors Open*8 | Pressing the lock button of the door control transmitter assembly*2 or electrical key*3 while the door is open causes the door to lock when it is closed. |
| Automatic Relock | If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically. |
| Repeat | If a door is not locked in response to the locking operation of the door control transmitter assembly*2 or electrical key*3, the main body ECU will output a lock signal again after 1 second elapses. |
| Security | Sends a door lock/unlock operation request signal as a rolling code. |
| Customization | The on or off setting of some functions and settings can be performed using the Global TechStream (GTS). In addition, some functions are not available depending on specification. For details, refer to the Repair Manual. |
*1: The default setting differs depending on the model.
*2: Models without entry and start system
*3: Models with entry and start system
*4: The function can be set to unlock all the doors after 1 or 2 wireless door lock control operations by using the customization function.
*5: Models with power back door system
*6: Models with answer back buzzer function
*7: Models with power back door answer back hazard warning light function
*8: Destination package for Korea
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.