CONSTRUCTION
The electrical key consists of a mechanical key, transmitter for the wireless door lock control, transceiver for the entry function, and transponder chip for the immobiliser function.
This mechanical key works for the driver's door, but cannot be used to start the hybrid system.
The transmitter for the wireless door lock control has a lock button, unlock button, power back door button*1 and panic button*2.
*1: Models with power back door system
*2: Destination package for Korea
The transceiver for the entry function receives the signals from the antennas and returns the ID code of the electrical key to the door control receiver.
The transponder chip for the immobiliser function returns a signal to the power switch as a response to the radio wave signals received from the power switch.
An indicator light that can be used to check the operation condition and battery condition is provided.
| *A | Models with Power Back Door System | *B | Destination Package for Korea |
| *1 | Electrical Key (Electrical Key Transmitter Sub-assembly) | *2 | Indicator Light |
| *3 | Lock Button | *4 | Unlock Button |
| *5 | Power Back Door Button | *6 | Panic Button |
| *7 | Mechanical Key | - | - |
OPERATION
Auto Power Off
When any button of the electrical key is pressed and held, it stops sending electrical waves after approximately 20 seconds to prevent battery depletion.
Indicator Light
The indicator light of the electrical key illuminates while communication is in progress during ID certification, in addition to during button operations, so that the operation condition and battery condition can be checked.