Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM
NM3620E _59 Vehicle Exterior _077398 WINDOW / GLASS _0376458 POWER WINDOW CONTROL SYSTEM GE GENERAL F

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The power window control system controls power window operation using the power window regulator motors.


b.

The main controls for this system are the multiplex network master switch assembly and each door power window regulator switch. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor.



PRECAUTION


a.

Ignition Switch Expressions (Gasoline Models)

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)



b.

Door Control Receiver Expressions

i.

The type of door control receiver used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Vehicle Specification Part Name in Manual Actual Part Name
Models with Tire Pressure Warning System Models with Entry and Start System Door Control Receiver Electrical Key and TPMS Receiver Assembly
Models without Entry and Start System Door Control Receiver Door Control and Tire Pressure Monitoring System Receiver Assembly
Models without Tire Pressure Warning System Models with Entry and Start System Door Control Receiver Door Control Receiver
Models without Entry and Start System Door Control Receiver Door Control Receiver